2. SPECIFICATIONS
2.2 Option
2.2 Option
Option Name | Type | Usage |
|
|
|
Swing cutter module | A stop and cut swing cutter | |
|
|
|
Rotary cutter module | Rotary cutter | |
|
|
|
Peel off module | This allows use of | |
|
| rewind labels and backing paper together when using the |
|
| rewind guide plate. To purchase the strip module, please |
|
| inquire at your local distributor. |
|
|
|
Ribbon saving module | This module moves the print head up and down by using a | |
|
| solenoid to save the ribbon loss as far as possible. To |
|
| purchase the ribbon saving module, please contact your |
|
| distributor or TOSHIBA TEC HQ can assist in finding one |
|
| for you. |
|
|
|
Fanfold paper guide | This is a paper guide exclusively used for fanfold paper. | |
module |
| Attaching it in place of the standard paper guide allows the |
|
| printer to print on fanfold paper. |
|
|
|
PCMCIA interface | This board enables the following PCMCIA cards to be used. | |
board |
| * LAN card: 3 COM EtherLink®III (recommended) |
|
| 3 COM 3CCE589ET (recommended) |
|
| * ATA card: Conforming to PC card ATA standard |
|
| * Flash memory card:1MB and 4MB cards (See Page |
|
|
|
Expansion I/O | Installing this board allows connection to external device. | |
interface board |
|
|
|
|
|
NOTE: To purchase the OPTIONAL KIT, please contact your authorized TOSHIBA TEC representative or TOSHIBA TEC Head Quarter.
2.3 Ribbon
Type | Spool type |
Width | 68 mm ~ 112 mm |
Length | 600 m |
Outer diameter | ø90 mm (max.) |
NOTES: 1. "On the fly issue" means that the printer can draw and print without stopping between labels.
2.To ensure print quality and print head life use only TOSHIBA TEC specified media and ribbons.
3.When using the cutter ensure that label length B plus inter label gap length E exceeds 35 mm. (i.e. label pitch should be greater that 35 mm.) (See Page
4.When rewinding the media onto the
5.Use of rough media for the ribbon saving issue may cause ribbon smudges.