Toshiba 351C, 451C, 281C manual Server Name, Network Path, Login User Name, Password, Command Port

3. Scan to File

7.If the screen to set up the remote destination is displayed by pressing the [REMOTE 1] or [REMOTE 2] button, specify the remote destination. You can specify the remote destination using FTP or SMB.

When you want to store the data using FTP, select the [FTP] button and specify the following items as you require. Then press the [ENTER] button.

z[SERVER NAME]

Press this to enter the IP address of the FTP server. For example, if you want to store the data into “ftp://10.10.70.101/user01/scan/”, enter “10.10.70.101” here.

z[NETWORK PATH]

Press this to enter the folder path to the folder where you want to store the data in the FTP server. For example, if you want to store the data into “ftp:// 10.10.70.101/user01/scan/”, enter “user01\scan” here. Make sure to use “\” instead of “/” to specify the path.

z[LOGIN USER NAME]

Press this to enter the user name to login the FTP server if required.

z[PASSWORD]

Press this to enter the password to login the FTP server if required.

z[COMMAND PORT]

Press this to enter the port number to be used for command. Generally “-” is entered for the command port. When “-” is entered, the port number that is set by the administrator will be used. Change this option only when you want to use another port number.

SUPPLEMENT: When you press each button, the letter entry screen is displayed. Enter the value using the keyboard and digital keys, and press the [ENTER] button to set the entry.

32 Scanning Guide — How to Perform Scan to File