6 If you want to store the scanned data in network folder, press the [REMOTE 1] or [REMOTE 2] buttons.
yIf the selected remote destination (REMOTE 1 or REMOTE 2) is configured to save the scanned data in specified network folder by the administrator, the button will be the reversed button when you press it. In this case, users cannot change the destina- tion. If the remote destination needs to be changed, it can be configured in the Administration Tab of the TopAccess. Please consult your network administrator.
yIf the selected remote destination (REMOTE 1 or REMOTE 2) is configured for users to specify the desired network folder, the screen to set up the remote destination is displayed.
7 If the screen to set up the remote destination is displayed by press- ing the [REMOTE 1] or [REMOTE 2] button, specify the remote des- tination. You can specify the remote destination using FTP, SMB, NetWare IPX, or NetWare IP.
When you want to store the data using FTP, select the [FTP] button and specify the following items as you require. Then press the [ENTER] button.
y[SERVER NAME]
Press this to enter the IP address of the FTP server. For example, if you want to store the data into “ftp://10.10.70.101/user01/scan/”, enter “10.10.70.101” here.
y[NETWORK PATH]
Press this to enter the folder path to the folder where you want to store the data in the FTP server. For example, if you want to store the data into “ftp://10.10.70.101/user01/ scan/”, enter “user01\scan” here. Make sure to use “\” instead of “/” to specify the path.
y[LOGIN USER NAME]
Press this to enter the user name to login the FTP server if required.
y[PASSWORD]
Press this to enter the password to login the FTP server if required.