![](/images/new-backgrounds/1119967/11996737x1.webp)
Installation | Attaching an incompatible switch model |
|
|
Connect the other end of the Cat 5 cable to any available ARI port on the rear panel of the KVM
Turn off and turn on the target devices to the tiered appliance according to the instructions that are included with that device.
Turn off and turn on the tiered appliance to enable its local port to recognize the
Repeat the above steps for all tiered appliances that you want to attach to the switching system.The switching system will automatically merge the
two appliances.
All target devices that are connected to the tiered appliance are included in the main appliance target device list in the OSCAR interface. However, when an earlier appliance model is connected to a
2.5.2Attaching an incompatible switch model
It is possible to attach appliances that are not listed earlier in this chapter. Incompatible appliances do not support seamless tiering and devices attached to an incompatible appliance will not be displayed in the OSCAR menu for the KVM
Using the OSCAR interface, select the incompatible appliance.
Press the ESC key to deactiate the OSCAR interface for the KVM
Use the remaining OSCAR interface to select devices attached to the incompatible appliance.
2.6Setting up the KVM s2-0411 appliance
With the KVM
11 |