Basic operations | Viewing and disconnecting user connections |
|
|
3.8Viewing and disconnecting user connections
You can view and disconnect users from target devices through the User Status window. The user (U) is always visible; however, you can display either the target device name or EID number to which a user is connected. If no user is currently connected, both the User and Server Name fields are blank.
Figure 16: User Status window
3.8.0.1Viewing current user connections
Click Commands - User Status. The User Status window opens.
3.8.0.2Disconnecting a user
From the User Status window, click the letter that corresponds to the user to disconnect. The Disconnect window opens.
Complete one of the following steps:
•Click OK to disconnect the user and return to the User Status window.
•Click X or press Escape to exit the window without disconnecting a user.
If the User Status list has changed since it was last visible, the mouse cursor will turn into an hourglass as the list is automatically updated. No mouse or keyboard input is accepted until the list update is complete.
3.8.0.3Resetting the keyboard and mouse
You can reset the keyboard and mouse by clicking Commands - Device Reset. If the keyboard or mouse is still not responding, you might be able to
29 |