Siemens KVM s2-0411 manual Other Console Main menu options

Page 44

Other Console Main menu options

Computer terminal operations

 

 

When DHCP is selected, the IP Address, Netmask, and Default Gateway settings are automatically assigned to the appliance and cannot be modified by a user. If you are using the DHCP option, configure the DHCP target device to provide an IP address to the appliance and then skip step 5.

Select the remaining options from the Network Configuration menu to finish the configuration of the appliance with an IP address, netmask, default gateway, and ping response.

Type 0 (zero) and press Enter to return to the Console Main menu. The appliance will then reboot.

4.1.2Other Console Main menu options

Besides the Network Configuration option, the Console Main menu of the appliance has the following menu items: Security Configuration, Firmware Management, Enable Debug Messages, Restore Factory Defaults, Reset Appliance, and Exit. Each is discussed in the following section.

4.1.2.1Security configuration

Console Password: Enable or disable the console password using security for the console (access requires an Admin account).In the event that you forgot the password, type Help. You will be given a one time use key to supply to technical support, who will then supply you with a one time use password that you can use to access the Serial Port.

4.1.2.2Firmware management

This menu contains the Flash Download selection. For more information, see Appendix A: Flash Upgrades.

4.1.2.3Enable debug messages

This menu option turns on console status messages. Because this can significantly reduce performance, you should only enable debug messages when instructed to do so by technical support. When you are finished viewing the messages, press any key to exit this mode.

4.1.2.4Restore factory defaults

This menu option will restore all appliance options to the default settings.

4.1.2.5Reset appliance

You can use this menu option to initiate a soft reset of the appliance.

4.1.2.6Exit

This menu selection will return you to the ready prompt.

36

590-595-609A

Image 44
Contents Control2 Page KVM s2-0411 User Guide Copyright and Trademarks Comments... Suggestions... CorrectionsCertified documentation according to DIN EN ISO Contents Contents Computer terminal operationsAppendices Contents About the KVM s2-0411 Appliance GlossaryNotational Conventions BoldFeatures and benefits Features and benefitsKVM s2-Adapter 1.1 USB-VGA USB and VGA connectors KVM-IA Intelligent AdaptersOscar graphical user interface SecurityOperation modes VideoFlash upgradability Installation Safety precautionsRequired items GeneralRack mounting the appliance Rack mounting the applianceGeneral guidelines Appliance horizontal installation Installing the KVM s2-0411 appliance Installing the KVM s2-0411 applianceConnecting a KVM-IA to each target device Connecting local peripheral devicesInstallation Connecting a KVM-IA to each target device Adding earlier appliance modelsLocal user KVM s2-0411 appliance Earlier appliance Models Target deviceAttaching an incompatible switch model Setting up the KVM s2-0411 applianceAttaching an incompatible switch model Setting up the KVM s2-0411 appliance Starting the Oscar interface Controlling the switching system from the analog user portBasic operations Symbol Description Starting the Oscar interfaceConnecting a user to a target device Using the Oscar interfaceConnecting a user to a target device Click Setup MenuUsing the Oscar interfaceBasic operations Alt+port numberConfiguring the appliance and the Oscar interface Option PurposeAssigning target device names Assigning device typesAssigning a device type Accessing the Devices windowAssigning device types Changing the display behavior Accessing the Menu windowChanging the display behavior Setting a screen delay Selecting display languageSelecting display language Selecting the order of the target devicesSpecifying the status-flag settings Click Setup FlagControlling the status flag Flag DescriptionSetting the keyboard country code Setting the keyboard country codeSetting appliance security Changing the keyboard country codeSetting or changing a password Disabling password protectionEnabling the screen saver Disabling the screen saverFeature Purpose Managing target device tasks using the Oscar interfaceAccessing the Commands window Displaying version information Displaying version informationUpgrading the firmware Viewing the current display configurationUpgrading the firmware Viewing and disconnecting user connections Disconnecting a userResetting the keyboard and mouse Viewing current user connectionsScanning the switching system Scanning the switching systemClick Version Reset Adding target devices to the scan listRemoving a target device from the scan list Starting the scan modeRemoving a target device from the scan list Canceling scan mode Running switching system diagnosticsCanceling scan mode Running switching system diagnostics Test DescriptionRunning diagnostic tests Running diagnostic testsConsole menu Configuring the network using the Console menuComputer terminal operations Other Console Main menu options Flash upgrades AppendicesUpgrading the KVM s2-0411 appliance Upgrading a new Flash fileUpgrading the KVM-IA firmware Upgrading KVM-IA firmware individuallyAppendices Upgrading the KVM-IA firmware Repairing damaged firmware Repairing damaged firmwareWiring standards UTP cablingUTP copper cabling PinCabling installation, maintenance, and safety tips Cabling installation, maintenance, and safety tipsTechnical specifications Ambient Atmospheric Condition Ratings Power SupplySafety and EMC Approvals and Markings Technical Support Technical SupportBefore you call Before you call Page Page KVM s2-0411 Bedienungsanleitung Copyright und Marken Kommentare… Vorschläge… VerbesserungenZertifizierte Dokumentation nach DIN EN ISO Normalbetrieb InhaltDie KVM s2-0411-Einheit Inhalt Terminalbetrieb des ComputersAnhänge Inhalt Die KVM s2-0411-Einheit GlossarDarstellungskonventionen FettMerkmale und Vorteile Merkmale und VorteileKVM-IA Intelligente Adapter Grafische Benutzeroberfläche Oscar SicherheitBetriebsmodi Flash-AktualisierungenFlash-Aktualisierungen Allgemeine Sicherheitshinweise Erforderliche KomponentenSicherheitsvorkehrungen Allgemeine Sicherheitshinweise Horizontale Installation der Einheit in den 1 HE-Rackplatz Rackbefestigung der EinheitAllgemeine Anweisungen Rackbefestigung der EinheitHorizontale Installation der Einheit in den 1 HE-Rackplatz Installieren der KVM s2-0411-Einheit Installation Installieren der KVM s2-0411-EinheitHinzufügen älterer Einheitenmodelle Anschließen eines KVM-IA an jedes ZielgerätAnschließen von lokalen Peripheriegeräten Anschließen eines KVM-IA an jedes ZielgerätÄltere Einheiten Modelle Zielgerät Einrichten der KVM s2-0411-Einheit Anschließen eines nicht kompatiblen Switch- ModellsAnschließen eines nicht kompatiblen Switch-Modells Aufrufen der OSCAR-Benutzeroberfläche Steuern des Switching-Systems über den AnalogportNormalbetrieb Symbol Beschreibung Aufrufen der OSCAR-BenutzeroberflächeVerbinden eines Benutzers mit einem Zielgerät Verwenden der OSCAR-BenutzeroberflächeTaste, Tastenkombination Wirkung Oder Mausaktion Verbinden eines Benutzers mit einem ZielgerätVerwenden der OSCAR-BenutzeroberflächeNormalbetrieb Alt+PortnummerKonfiguration der Einheit und der OSCAR- Benutzeroberfläche Option Zweck Zuweisen von Zielgerätenamen 2 Gerätetypen zuordnen Gerätetypen zuordnenZugriff auf das Dialogfeld „Geräte Zuweisen des GerätetypsZugriff auf das Menüfenster 3 Ändern des AnzeigeverhaltensÄndern des Anzeigeverhaltens Auswählen der Anzeigereihenfolge für Zielgeräte Einstellen der ZeitverzögerungAuswählen der Sprache Steuern des Status-FlagsFlag Beschreibung Auswählen der SpracheFestlegen der Status-Flag-Einstellungen Einstellen der länderspezifischen TastatureinstellungenEinstellen der länderspezifischen Tastatureinstellungen 6.1 Ändern der länderspezifischen Tastatureinstellungen Festlegen der Sicherheitseinstellungen der EinheitAktivieren des Bildschirmschoners Deaktivieren des BildschirmschonersEinrichten oder Ändern des Kennworts Deaktivieren des KennwortschutzesZugriff auf das Dialogfeld „Befehle Funktion ZweckAnzeigen der Versionsinformationen Anzeigen der VersionsinformationenAktualisieren der Firmware Anzeigen der aktuellen AnzeigekonfigurationAktualisieren der Firmware Trennen von Benutzerverbindungen Anzeigen und Trennen von BenutzerverbindungenAnzeigen der aktuellen Benutzerverbindungen Scannen des Switching-Systems Hinzufügen von Zielgeräten zur Scan-ListeEntfernen eines Zielgeräts aus der Scan-Liste Entfernen eines Zielgeräts aus der Scan-ListeNormalbetrieb Starten des Scan-Modus Starten des Scan-ModusAbbrechen des Scan-Modus Test Beschreibung Diagnosetests am Switching-System durchführenDiagnosetests am Switching-System durchführen Starten der Diagnosestests Starten der DiagnosestestsNormalbetrieb Konfigurieren des Netzwerks über das Konsolenmenü Terminalbetrieb des ComputersKonsolenmenü Weitere Optionen im Konsolenhauptmenü Anhänge Flash-AktualisierungAktualisieren der KVM s2-0411-Einheit Aktualisieren einer neuen Flash-DateiAktualisierung der KVM-IA-Firmware Aktualisierung der KVM-IA-Firmware AnhängeGleichzeitiges Aktualisieren mehrerer KVM-IAs Individuelle Aktualisierung von KVM-IA-FirmwareAnhänge Aktualisierung der KVM-IA-Firmware Reparieren von beschädigter Firmware Reparieren von beschädigter FirmwareReparieren von beschädigter Firmware Anhänge UTP-Kabel UTP-KupferkabelKabelnormen StiftKabelinstallation, Kabelwartung und Sicherheitshinweise Technische Daten Abmessungen StromversorgungUmgebungsbedingungen Nennwerte Sicherheits- und EMV-Zulassungen und KennzeichnungenTechnischer Kundendienst Technischer KundendienstVor dem Anruf Vor dem Anruf Anhänge Page 590-595-609A

KVM s2-0411 specifications

The Siemens KVM S2-0411 is a robust and versatile keyboard, video, and mouse (KVM) switch designed to facilitate the management of multiple servers from a single console. This device is particularly beneficial in data centers and IT environments where efficient control over several machines is crucial for maximizing productivity and resource utilization. The S2-0411 stands out due to its user-friendly features and advanced technologies that cater to both small and medium-sized enterprises.

One of the main features of the Siemens KVM S2-0411 is its ability to support multiple video resolutions. This device accommodates a wide range of resolution standards, ensuring compatibility with various monitors. It allows for seamless switching between different systems without any compromise in video quality. This feature is invaluable for environments that utilize high-definition displays and require crystal-clear visuals for accurate monitoring and management.

The S2-0411 is equipped with a variety of input and output options, allowing it to connect with numerous devices effortlessly. It supports both USB and PS/2 connections for keyboard and mouse interfaces, making it versatile for different setups. Additionally, the device typically includes multiple port configurations, allowing users to connect numerous servers and workstations simultaneously.

Another significant characteristic of the Siemens KVM S2-0411 is its advanced security features. The device often incorporates user authentication protocols to restrict access to authorized personnel only. This layer of security is critical in preventing unauthorized access to sensitive systems and information, ensuring that data integrity is maintained.

In terms of technology, the KVM S2-0411 utilizes high-performance transmission methods, including high-speed data transfer and low-latency operations. This ensures that users can control remote systems in real-time, which is essential for troubleshooting and effective system management. Furthermore, many models come with additional options such as audio support, allowing for a more complete multimedia management experience.

Its compact design and rack-mountable structure make the Siemens KVM S2-0411 an ideal choice for organizations with limited space. Overall, the Siemens KVM S2-0411 offers a blend of functionality, security, and ease of use, making it a valuable tool for IT administrators looking to streamline their operations and enhance overall efficiency. Whether managing a small number of systems or overseeing a larger network, the S2-0411 provides the necessary features and flexibility required for optimal performance.