Setting the keyboard country code | Basic operations |
|
|
Figure 12: Keyboard window
3.5.6.1Changing the keyboard country code
Press Print Screen to start the OSCAR interface. The Main window opens.
Click Setup - Keyboard. The Keyboard window opens.
Select the country code for the keyboard, and click OK. Confirm the change in the Keyboard Warning window.
Click OK to save the change, or click X or press Escape to exit without saving the change.
3.5.6.2Setting appliance security
You can enable a screen saver to start if the user remains unused for a specified length of time. When the screen saver starts, the user is disconnected from any target device to which it was connected. The screen saver stops when you press any key or move the mouse.
To immediately start the screen saver, press Print Screen and press Pause.
If you set a password, the keyboard and mouse are locked when the screen saver starts. When you press a key or move the mouse while the screen saver is running, a Password window opens, and you must type the password and click OK to unlock the keyboard and mouse.
If you forget the password, you must call technical support. See Appendix
5.4Technical Support on page 45 for contact information.
24 |