![](/images/new-backgrounds/1119967/11996777x1.webp)
Basic operations | Removing a target device from the scan list |
|
|
The window contains a listing of all target devices that are attached to the appliance. To select target devices to be scanned, complete one of the following steps:
•Select the check box next to the target devices that you want to scan.
•
•Press Alt and the EID number of the target device that you want to scan. You can select up to 16 target devices from the list.
In the Time field, type the number of seconds (from 3 to 255) of time before the scan moves to the next target device in the sequence.
Click OK.
3.9.2Removing a target device from the scan list
Complete one of the following steps:
•In the Scan window, clear the check box next to the target device to be removed.
•
•Press Shift + Delete to remove the selected target device and all entries below it.
•Click the Clear button to remove all target devices from the scan list.
Click OK.
3.9.3Starting the scan mode
Click Commands. The Commands window opens.
31 |