Siemens CP 343-1 manual Contents

Contents

Contents

Contents − Part A

Ethernet CPs − General information see general part

Note

Please remember that Part A of the device manual also belongs to the description of the CP. Among other things, it contains explanations of the safety notices and general information that applies to all S7 CPs for Industrial Ethernet.

You will find the references in this Part B of the manual /.../ in the Appendix of the general Part A of the manual.

The following version of the manual Part A of the manual belongs to this version of Part B: Release 01/2007

You can download the general Part from the Internet:

http://www4.ad.siemens.de/view/cs/en/8777865

Contents − Part B3L

1	Properties / Services		B3L−5
2	Requirements for Use		B3L−8
3	Installation and Commissioning		B3L−11
	3.1	Procedure / Steps	B3L−11
4	Displays . .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	B3L−14
5	Performance Data		B3L−17
	5.1	Number of Possible Connections over Ethernet	B3L−17
	5.2	Characteristic Data for S7 Communication	B3L−17
	5.3	Characteristics of the SEND/RECEIVE Interface	B3L−18
	5.4	Characteristic Data for PROFINET IO	B3L−19
6	Configuring and Programming the CP as a PROFINET IO Device		B3L−20
	6.1	Overview of the Preparatory Steps	B3L−20
	6.2	Principle of Data Exchange over PROFINET IO	B3L−21
	6.3	Configuration	B3L−22
	6.3.1	Installing the CP and Specifying it as PROFINET IO Device	B3L−22
	6.3.2	Assigning the PROFINET IO Device to a PROFINET IO Controller . .	B3L−24
	6.4	Programming	B3L−27
	6.4.1	Interface for Programming on the PROFINET IO Device	B3L−27
CP 343-1 Lean for Industrial Ethernet / Manual Part B3L			B3L−3
Release 03/2007

C79000-G8976-C198-04