Toshiba E-STUDIO202S manual Place the original you wish to scan on, From Scanner or Camera

Page 17

3 Scanning an Image from a WIA-Compliant Application (Windows XP/Vista) (part 1)

If you are using Windows XP/Vista, you can use the WIA driver to scan from Desktop Document Manager, Paint and other WIA-compliant applications. The procedure for scanning using Paint is explained in the following.

1	Place the original you wish to scan on the
	document glass/ADF.

Reference: For information on setting an original for scanning, refer to "ORIGINAL PLACEMENT" in the Operation Manual.

2	After starting Paint, click the "File" menu and select
	"From Scanner or Camera".

The scan screen of the WIA driver will appear.

If you have WIA drivers for other devices installed in your computer, the "Select Device" screen will

open. Select "TOSHIBA e-STUDIOXXXX" and Note click the "OK" button.

TOSHIBA e-STUDIOXXX X

CONTENTS 15 INDEX

Image 17

Contents STUDIO202S Online Manual Contents How to Print Out the Online Manual How to Use the Online ManualHow to Control the Online Manual Printing Overview Flow chart shown below provides printing overviewBasic Printing Windows 98/Me Starting the Printer Driver Using the Start ButtonWindows 2000/XP/Vista Check box Printer Driver SettingsPrinting a Watermark How to Print a WatermarkFitting the Printed Image to the Paper Printing Multiple Pages on One Outline of the Print Status Window Scanning Overview Flow chart shown below provides scanning overviewDocument glass/ADF Place the original s you wish to scan onAfter starting Desktop Document Manager, click File menu and select Select ScannerClick the Acquire button Select Acquire Image from the File menu, orScanning Position menu, select Position in which you placed the original in StepSet-up screen Scanner Driver SettingsPreview screen Auto Scan Area Adjustment buttonFrom Scanner or Camera Place the original you wish to scan onAfter starting Paint, click the File menu and select Preview button Select the paper source and picture type, and clickClick the Scan button Scanning begins and the image is acquired into PaintPrinters and Other Hardware, and then click Click the start button, click Control Panel, clickScanners and Cameras Click the Toshiba e-STUDIOXXXX icon and thenContents 18 Index Click the Finish button Outline of Button Manager Show Twain setting screen when scanningButton Manager Settings Printing trouble Identifying Unit ProblemsCheck 2 Is the interface cable connected securely? Check the Connection between the Unit and ComputerIf the USB cable becomes disconnected USB cableCheck 2 Is your hard disk fragmented? Check Your ComputerCheck 1 Is there enough computer memory or hard disk space? Install the software, referring to Installing When you make sure that the USB port is enabledPlug and Play Screen does not Appear Click the icon beside the Universal Serial BusFailed to Install the Driver Windows 2000/XP Faint, Uneven or Smeared Print Output Check 6 Is the maintenance indicator lit?Check 2 Is the paper curled? Check 3 Is the paper too thick or too thin?Check 3 Is the paper loaded correctly? Check 2 Is the orientation of document setting correct?Check 4 Has the printer driver been installed properly? Check 2 Is the on Line indicator off?Nothing Prints Check 1 Has a paper jam occurred?Poor Scanning Result Check 1 Is the original clean?Check 2 Have you specified a suitable resolution? Check 3 Have you set the original correctly on the ADF? Scanned Image is Incorrectly PositionedCheck 1 Have you placed the original straight? Check 1 Is your application compliant to TWAIN? Unable to Scan the ImageRestart your computer Uninstalling the SoftwareClick Add or Remove Programs Tab Setting Selections Initial setting Printer Driver Features partContents 35 Index Twain IndexR080520F8700-TTEC OME08009400

Place the original you wish to scan on the

document glass/ADF.

After starting Paint, click the "File" menu and select

"From Scanner or Camera".