Toshiba E-STUDIO202S manual Check 2 Is the orientation of document setting correct?

Page 30

4 Characters or Graphics are not Printed in Correct Position

If a document is printed skewed or partly off the paper, follow the steps listed below.

CHECK 1 Is the paper size loaded in the tray the same as that specified in the printer driver?

Check if the "Paper Size" options suit the size of the paper loaded in the tray.

If the "Fit To Page" setting is activated, make sure that the paper size selected from the drop-down list of the "Fit To Paper Size" option is the same as the size of the loaded paper.

CHECK 2 Is the orientation of document setting correct?

Click the "Paper" tab in the printer driver setup screen, and verify if the "Image Orientation" option is set to your requirements.

CHECK 3 Is the paper loaded correctly?

If a document is physically damaged when it is output or the image is skewed on the paper, discard the damaged sheet, reinsert the paper supply and print again. Insert the paper so that there is no visible space between the paper and the paper guides.

Reference: See "LOADING PAPER" in the Operation Manual for more details on inserting paper.

CHECK 4 Did you correctly specify the margins for the application in use?

Check the layout of the document margins and the paper size settings for the application you are using. Also check if the print settings are specified correctly to suit the paper size.

Reference: Faint, Uneven or Smeared Print Output

CONTENTS 28 INDEX

Image 30

Contents STUDIO202S Online Manual Contents How to Use the Online Manual How to Control the Online ManualHow to Print Out the Online Manual Flow chart shown below provides printing overview Printing OverviewBasic Printing Starting the Printer Driver Using the Start Button Windows 2000/XP/VistaWindows 98/Me Printer Driver Settings Check boxHow to Print a Watermark Printing a WatermarkFitting the Printed Image to the Paper Printing Multiple Pages on One Outline of the Print Status Window Flow chart shown below provides scanning overview Scanning OverviewAfter starting Desktop Document Manager, click Place the original s you wish to scan onDocument glass/ADF File menu and select Select ScannerScanning Position menu, select Select Acquire Image from the File menu, orClick the Acquire button Position in which you placed the original in StepScanner Driver Settings Set-up screenAuto Scan Area Adjustment button Preview screenPlace the original you wish to scan on After starting Paint, click the File menu and selectFrom Scanner or Camera Click the Scan button Select the paper source and picture type, and clickPreview button Scanning begins and the image is acquired into PaintScanners and Cameras Click the start button, click Control Panel, clickPrinters and Other Hardware, and then click Click the Toshiba e-STUDIOXXXX icon and thenContents 18 Index Click the Finish button Show Twain setting screen when scanning Outline of Button ManagerButton Manager Settings Identifying Unit Problems Printing troubleIf the USB cable becomes disconnected Check the Connection between the Unit and ComputerCheck 2 Is the interface cable connected securely? USB cableCheck Your Computer Check 1 Is there enough computer memory or hard disk space?Check 2 Is your hard disk fragmented? Plug and Play Screen does not Appear When you make sure that the USB port is enabledInstall the software, referring to Installing Click the icon beside the Universal Serial BusFailed to Install the Driver Windows 2000/XP Check 2 Is the paper curled? Check 6 Is the maintenance indicator lit?Faint, Uneven or Smeared Print Output Check 3 Is the paper too thick or too thin?Check 2 Is the orientation of document setting correct? Check 3 Is the paper loaded correctly?Nothing Prints Check 2 Is the on Line indicator off?Check 4 Has the printer driver been installed properly? Check 1 Has a paper jam occurred?Check 1 Is the original clean? Check 2 Have you specified a suitable resolution?Poor Scanning Result Scanned Image is Incorrectly Positioned Check 1 Have you placed the original straight?Check 3 Have you set the original correctly on the ADF? Unable to Scan the Image Check 1 Is your application compliant to TWAIN?Uninstalling the Software Click Add or Remove ProgramsRestart your computer Printer Driver Features part Tab Setting Selections Initial settingContents 35 Index Index TwainR080520F8700-TTEC OME08009400