Toshiba E-STUDIO202S Starting the Printer Driver Using the Start Button, Windows 2000/XP/Vista

Page 6

2 Starting the Printer Driver Using the "Start" Button

You can open the printer driver and change the printer driver settings from the Windows "start" button. Settings adjusted in this way will be the initial settings when you print from an application. (If you change the settings from the printer driver setup screen at the time of printing, the settings will revert to the initial settings when you quit the application.)

Reference: Basic Printing

Windows 2000/XP/Vista

1	Click the "start" button, and then click "Control
1	Panel".
	On Windows 2000, click the "Start" button and select
	"Settings".

2	Click "Printers and Other Hardware", and then click
2	"Printers and Faxes".
	• On Windows Vista, click "Printer".
	• On Windows 2000, click "Printers".

3	Click the "TOSHIBA e-STUDIOXXXX" printer driver
3	icon and select "Properties" from the "File" menu.

Windows 98/Me

1	Click the "Start" button, select "Settings" and then
1	click "Printers".

2	Click the "TOSHIBA e-STUDIOXXXX" printer driver
2	icon and select "Properties" from the "File" menu.

3 Click the "Setup" tab.

	On Windows Vista, click "Printer".
4	Click the "Printing Preferences" button in the
4	"General" tab.

The printer driver setup screen will appear.

Reference: Printer Driver Settings

The printer driver setup screen will appear.

Reference: Printer Driver Settings

CONTENTS 4

INDEX

Image 6

Contents STUDIO202S Online Manual Contents How to Use the Online Manual How to Control the Online ManualHow to Print Out the Online Manual Flow chart shown below provides printing overview Printing OverviewBasic Printing Starting the Printer Driver Using the Start Button Windows 2000/XP/VistaWindows 98/Me Printer Driver Settings Check boxHow to Print a Watermark Printing a WatermarkFitting the Printed Image to the Paper Printing Multiple Pages on One Outline of the Print Status Window Flow chart shown below provides scanning overview Scanning OverviewAfter starting Desktop Document Manager, click Place the original s you wish to scan onDocument glass/ADF File menu and select Select ScannerScanning Position menu, select Select Acquire Image from the File menu, orClick the Acquire button Position in which you placed the original in StepScanner Driver Settings Set-up screenAuto Scan Area Adjustment button Preview screenPlace the original you wish to scan on After starting Paint, click the File menu and selectFrom Scanner or Camera Click the Scan button Select the paper source and picture type, and clickPreview button Scanning begins and the image is acquired into PaintScanners and Cameras Click the start button, click Control Panel, clickPrinters and Other Hardware, and then click Click the Toshiba e-STUDIOXXXX icon and thenContents 18 Index Click the Finish button Show Twain setting screen when scanning Outline of Button ManagerButton Manager Settings Identifying Unit Problems Printing troubleIf the USB cable becomes disconnected Check the Connection between the Unit and ComputerCheck 2 Is the interface cable connected securely? USB cableCheck Your Computer Check 1 Is there enough computer memory or hard disk space?Check 2 Is your hard disk fragmented? Plug and Play Screen does not Appear When you make sure that the USB port is enabledInstall the software, referring to Installing Click the icon beside the Universal Serial BusFailed to Install the Driver Windows 2000/XP Check 2 Is the paper curled? Check 6 Is the maintenance indicator lit?Faint, Uneven or Smeared Print Output Check 3 Is the paper too thick or too thin?Check 2 Is the orientation of document setting correct? Check 3 Is the paper loaded correctly?Nothing Prints Check 2 Is the on Line indicator off?Check 4 Has the printer driver been installed properly? Check 1 Has a paper jam occurred?Check 1 Is the original clean? Check 2 Have you specified a suitable resolution?Poor Scanning Result Scanned Image is Incorrectly Positioned Check 1 Have you placed the original straight?Check 3 Have you set the original correctly on the ADF? Unable to Scan the Image Check 1 Is your application compliant to TWAIN?Uninstalling the Software Click Add or Remove ProgramsRestart your computer Printer Driver Features part Tab Setting Selections Initial settingContents 35 Index Index TwainR080520F8700-TTEC OME08009400