Toshiba e-STUDIO281c, 451C, 351C manual PCL5c 600 x Detail 05-1030 1200 x 05-1038 Yellow

3. Printer-specific Adjustments

Color to be	PDL	Resolution	Halftone	[05] code	Subcode	Value	Acceptable	Default
adjusted						recommended	value range
Y	PCL5c	600 x 600	Detail	05-1030	0/1/2
		1200 x 600	Detail	05-1038	0/1/2
(Yellow)	PS3	600 x 600	Detail	05-1014	0/1/2
		1200 x 600	Detail	05-1022	0/1/2
M	PCL5c	600 x 600	Detail	05-1031	0/1/2
		1200 x 600	Detail	05-1039	0/1/2
(Magenta)	PS3	600 x 600	Detail	05-1015	0/1/2
		1200 x 600	Detail	05-1023	0/1/2	Set a value larger	0 to 255	128
C	PCL5c	600 x 600	Detail	05-1032	0/1/2	than 128.
		1200 x 600	Detail	05-1040	0/1/2
(Cyan)	PS3	600 x 600	Detail	05-1016	0/1/2
		1200 x 600	Detail	05-1024	0/1/2
K	PCL5c	600 x 600	Detail	05-1033	0/1/2
		1200 x 600	Detail	05-1041	0/1/2
(Black)	PS3	600 x 600	Detail	05-1017	0/1/2
		1200 x 600	Detail	05-1025	0/1/2

*Set the value in increments of approximately 10, while checking the printout until the optimum value is obtained.

*The value for the [05] code for K (black) will affect black-and-white images (including text, lines and photos) on the printout.

*The subcode varies, according to the area for which the density is adjusted. Refer to the table below and set the

subcode for the area to be adjusted.

Subcode	Area for the density to be adjusted
0	Low-density area
1	Medium-density area
2	High-density area

<Note> The adjustment results are reflected in "Detail" of the Halftone options and "Line Art" of the Image Quality Type options of the printer driver, and will subsequently apply to all printouts that use the changed setting. (For instance, if the values for [05] code for PCL and Detail are changed, they will be applied to printing performed with PCL5c and Halftone = "Detail" (or "Auto") selected.) Carefully perform the adjustment, being aware that the image quality of all future printouts will be changed, when printing out originals other than the one that is used for the adjustment.

Note that this adjustment has no impact when "Smooth" is selected in the "Halftone" options, or when any one of "General," "Photo" and "Presentation" is selected in the "Image Quality Type" options and "Auto" is selected in the "Halftone" options.

3.7 e-STUDIO281c/351c/451c