Toshiba e-STUDIO281c, 451C, 351C manual Subcode Area for the density to be adjusted

2. Copier-specific Adjustments

(4) Enter adjustment mode [05]. Change the values for codes [1780/1785/1790/1795] or [1783/1788/1793/1798] to adjust the color density.

Color to be	Original mode	[05] code	Subcode	Value recommended	Acceptable	Default
adjusted					value range
Y	Text	05-1780	0/1/2
(Yellow)	Map	05-1783	0/1/2
M	Text	05-1785	0/1/2
(Magenta)	Map	05-1788	0/1/2	Set a value larger than 128.	0 to 255	128
C	Text	05-1790	0/1/2
(Cyan)	Map	05-1793	0/1/2
K	Text	05-1795	0/1/2
(Black)	Map	05-1798	0/1/2

*Set the value in increments of approximately 10, while checking the copy image until the optimum value is obtained.

*The subcode varies, according to the area for which the density is adjusted. Refer to the table below and

set the subcode for the area to be adjusted.

Subcode	Area for the density to be adjusted
0	Low-density area
1	Medium-density area
2	High-density area

‰Cautions after the completion of the adjustment

The adjustment may possibly cause a dark-colored area, such as in a photo, to become blurred on the copy. Also, it may also cause offset failure, grained images and degradation in gradation. Therefore, carefully perform the adjustment, while checking the copy image.

2.11 e-STUDIO281c/351c/451c