Toshiba 451C, 351C ‰ Procedure, Procedure Code Test print pattern Printing Paper, Referred, Size

1. General Adjustments – Copying, Printing and e-Filing (Output from Box)

‰Procedure

*The service technician must perform the adjustment in accordance with the procedure below.

(1) Make sure that no out-of-register colors are recognized on an original.

(2)Check a direction in which colors are misaligned.

*This adjustment is intended to correct the print start timing of the toner colors in the secondary scanning direction, in order to align the print positions of 3 toner colors (K, C and Y) with magenta (M). Therefore, it will be effective, only if colors are misaligned in the paper feeding direction (or the secondary scanning direction). If colors are misaligned in the direction perpendicular to the paper feeding direction (or the primary scanning direction), refer to <Hint> below.

<Hint> If colors are misaligned in the direction perpendicular to the paper feeding direction, enter test mode [03] and rotate the transfer belt for 5 minutes. (The main motor drives the transfer belt. Use 03-101 to rotate the main motor or 03-151 to stop it.) After that, check the copy or print image. If the colors still misaligned, replace the transfer belt or transfer belt unit. For further information regarding how to use test mode [03] and transfer belt replacement procedures, refer to the Service Manual and Service Handbook.

(3)Correct out-of-register colors in the secondary scanning direction.

*Two types of the color registration control procedures are provided (one type for A4/LT-sized paper), and the test print pattern varies according to the procedures. Either of the patterns is available to correct out- of-register colors. Therefore, print out whichever one is easier to use.

Procedure		[05] code	Test print pattern	Printing	Paper	No. of copies	Referred
				image	size	to be printed	to
Procedure 1	05-63		Test print pattern 63	Ladder	A3/LD	2	1.5.1
	05-68		Test print pattern 68		A4/LT	4	1.5.2
Procedure 2	05-64		Test print pattern 64	Block	A3/LD	2	1.5.3

*Use steps in order, as listed below. If you start with other than step "1," use subsequent steps to the primary one. (e.g. If you start with step "2," subsequently use steps "3," "4," "5" and "6" in order.)

	Order		[05] code	Procedure	Paper and range to be	Remarks*
					corrected
1		05-417		Procedure 1 or 2	A3/LD, 1st page	A
2		05-418			A3/LD, 2nd page	B
3		05-953			A4/LT, 1st page	C
4		05-954		Procedure 1	A4/LT, 2nd page	D
5		05-955			A4/LT, 3rd page	E
6		05-956			A4/LT, 4th page	F

*The alphabet in Remarks in the table above indicates a page to be printed as illustrated in "‰ Explanation" in the previous page.

<Hint> • First, change the values for codes 05-417 and 418 to "correct out-of-register colors on A3/LD- sized paper" and "roughly correct out-of-register colors on A4/LT-sized paper." Next, change the values for codes 05-953 to 956 to "further correct out-of-register colors on A4/LT-sized paper."

•The values for codes 05-417 and 418 are applied, in order to print or copy an original, on which a page data is pasted, on the transfer belt. The values for codes 05-953 to 956 are applied, in order to print or copy an original, on which a two-page data is pasted, on transfer belt.

*Refer to the color registration control procedures described later for further information regarding each procedure.

e-STUDIO281c/351c/451c 1.5