Toshiba e-STUDIO281c, 451C, 351C manual Acceptable Default Adjusted

3. Printer-specific Adjustments

Color to be	PDL	Resolution	Halftone	[05] code	Subcode	Value	Acceptable	Default
adjusted						recommended	value range
		600 x 600	Smooth	05-1026	0/1/2
	PCL5c		Detail	05-1030	0/1/2
		1200 x 600	Smooth	05-1034	0/1/2
Y			Detail	05-1038	0/1/2
(Yellow)		600 x 600	Smooth	05-1010	0/1/2
	PS3		Detail	05-1014	0/1/2
		1200 x 600	Smooth	05-1018	0/1/2
			Detail	05-1022	0/1/2
		600 x 600	Smooth	05-1027	0/1/2
	PCL5c		Detail	05-1031	0/1/2
		1200 x 600	Smooth	05-1035	0/1/2
M			Detail	05-1039	0/1/2
(Magenta)		600 x 600	Smooth	05-1011	0/1/2	Set a value larger
	PS3		Detail	05-1015	0/1/2
		1200 x 600	Smooth	05-1019	0/1/2	than 128 to increase
						the density.
			Detail	05-1023	0/1/2		0 to 255	128
		600 x 600	Smooth	05-1028	0/1/2	Set a value smaller
	PCL5c		Detail	05-1032	0/1/2
						than 128 to decrease
		1200 x 600	Smooth	05-1036	0/1/2
						the density.
C			Detail	05-1040	0/1/2
(Cyan)		600 x 600	Smooth	05-1012	0/1/2
	PS3		Detail	05-1016	0/1/2
		1200 x 600	Smooth	05-1020	0/1/2
			Detail	05-1024	0/1/2
		600 x 600	Smooth	05-1029	0/1/2
	PCL5c		Detail	05-1033	0/1/2
		1200 x 600	Smooth	05-1037	0/1/2
K			Detail	05-1041	0/1/2
(Black)		600 x 600	Smooth	05-1013	0/1/2
	PS3		Detail	05-1017	0/1/2
		1200 x 600	Smooth	05-1021	0/1/2
			Detail	05-1025	0/1/2

*Set the value in increments of approximately 10, while checking the printout until the optimum value is obtained.

*The subcode varies, according to the area for which the density is adjusted. Refer to the table below and

set the subcode for the area to be adjusted.

Subcode	Area for the density to be adjusted
0	Low-density area
1	Medium-density area
2	High-density area

<Note> After performing the adjustment, the values changed will be applied to all printouts for the "Image Quality Type" and "Halftone" options. (For instance, if the values for 05 code for PCL, 600 x 600 and Smooth are changed, they will be applied to printing performed with PCL5c, 600 x 600, Halftone = "Smooth" (or "Auto") selected.) Carefully perform the adjustment, being aware that the image quality of all future printouts will be changed, when printing out originals other than the one that is used for the adjustment.

e-STUDIO281c/351c/451c 3.13