(5) Access Time (Typ.) |
|
Average Random Access Time*3 | 95 ms (Max.24X) |
| 110 ms (10X) |
Average Random Seek Time*4 | 90 ms (Max.24X) |
| 100 ms (10X) |
Average Full Stroke Access Time*5 | 180 ms (Max.24X) |
| 200 ms (10X) |
*1: All CD formats, except CD Red book (audio), require additional application specific software and/or hardware. The
*2: Max 10X rotational speed is fixed for
For the other Formats, it is Max.24X speed but 20X or 16X speed is selectable by command. *3: Measured by performing multiple accesses which means reads of data blocks over whole
area of the media from 00 min. 02 sec. 00 block to 60 min. 01 sec. 74 block more than 3000 times. Includes positioning, setting, latency time and ECC implementation time (if required).
*4: Measured by performing multiple accesses which means seeks of data blocks over whole area of the media from 00 min. 02 sec. 00 block to 60 min. 01 sec. 74 block more than 3000 times. Includes positioning, setting time which is same definition as HDD.
*5: Measured by performing multiple maximum accesses which means reads of data blocks from 00 min. 02 sec. 00 block to 60 min. 01 sec. 74 block more than 100 times.
Includes positioning, setting, latency time and ECC implementation time (if required). Typ. value is for the average drive.
(6)Spin up Time (Focus Search Time and Disc Motor Start up Time)(Typ.)
2.8s (Max.24X)
| 2.2 s (Max.10X) |
(7) Data Buffer Capacity | 128 KBytes |
(8) Load/Eject | 1. Manual Load/Electrical Release |
| (Eject Button) |
| 2. Software Release (ATAPI command) |
| 3. Emergency Eject |
(9) Air Flow | Not Required |
(10) Acoustic Noise | Less than 40 dB |
| (with A weighted/Average) |
| at 1 meter of Front Bezel |
| Operation mode:Full stroke Access |
(11) Power Supply | +5 V(details in Section 7) |
4/27 |
|