Toshiba XM-7002B specifications 22/27, Device Configuration

Page 26

8.1.2. Connector

Figure 13, 14 shows the connector and Audio signal pin assignment.

8.2.Audio Modes

(1)16 Modes including 'Stereo', 'Lch Mono', 'Rch Mono' and 'Mute' are selectable by command. Default mode is 'Stereo'.

The audio output is automatically muted in the state other than the time of audio track playback.

(2)16 Steps of attenuation level for the Audio Output is selectable by command. Default level is 0 dB.

9. Device Configuration

9.1Master mode setting

Open the PIN 47 of I/O conectors.

9.2Slave mode setting

Short-circuit the PIN 47 and PIN 48 of I/O connectors.

*Master mode can be oppositely to Slave mode according to the specification. (CSEL mode)

22/27

XM-7002B Rev.1.0

Image 26

Contents Toshiba 12095XM-7002B Rev.1.0 Contents XM-7002B Rev.1.0 Introduction Features Specifications CD-RW, CD-R, CD-TEXTXM-7002B Rev.1.0 Page Page Page Adapter Mounting External Dimensions Configuration 10/27XM-7002B Block Diagram 12/27 Functions13/27 Interface14/27 ILO15/27 IOCS16 Iordy16/27 Shows the Host Interface DMA multi word Timings17/27 Timing of Host Interface Ultra DMAConnector pin assignments 18/2719/27 20/27 21/27 AudioDevice Configuration 22/27Busy Indicator 23/2724/27 MaintenanceSafety standards/Agency Approvals Emergency EjectElectrostatic Discharge Accessories25/27 PackagingToshiba 26/27EU-Declaration of Conformity 27/27