1
2
3
1 card retention door | 2 | card retention mechanism | 3 | release tabs (2) |
NOTICE: Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment.
NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer.
11Before you close the card retention door, ensure that:
•The tops of all cards and filler brackets are flush with the alignment bar.
•The notch in the top of the card or filler bracket fits around the alignment guide.
1
2
3 
4 
1 | alignment guide | 2 | alignment bar | 3 | release tab |
4 card retention door
Removing and Installing Parts
79