Dell DCSM, PY349 owner manual Removing and Installing Parts

Page 80

12Close the card retention door by snapping it into place to secure the cards.

13Connect any cables that should be attached to the card.

See the documentation for the card for information about the card’s cable connections.

14Replace the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on.

15If you installed a sound card:

a Enter system setup (see "System Setup" on page 111), go to Onboard Devices and select Integrated Audio, and then change the setting to Off.

b Connect external audio devices to the sound card’s connectors. Do not connect external audio devices to the microphone, speaker/headphone, or line-in connectors on the back panel. See "Back Panel Connectors" on page 14.

16If you installed an add-in network adapter and want to disable the integrated network adapter:

a Enter system setup (see "System Setup" on page 111), go to Onboard Devices and select Integrated NIC, and then change the setting to Off.

b Connect the network cable to the add-in network adapter’s connectors. Do not connect the network cable to the integrated connector on the back panel. See "Back Panel Connectors" on page 14.

17Install any drivers required for the card as described in the card documentation.

Removing a PCI Express Card

1Follow the procedures in "Before You Begin" on page 61.

2Gently push the release tab on the card retention door from the inside to pivot the door open. Because the door is captive, it will remain in the open position (see "Installing a PCI Card" on page 71 for an illustration of the card retention door).

3If your computer includes a card retention mechanism, to secure the x16 card in place from the top:

a Pivot the mechanism upward and gently squeeze in on the sides to release the mechanism from the two tab slots holding it in place.

b Set the retention mechanism aside in a secure location.

4If necessary, disconnect any cables connected to the card. Gently pull the securing tab, grasp the card by its top corners, and then ease it out of its connectors.

5If you are removing the card permanently, install a filler bracket in the empty card-slot opening.

NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer.

6Reseat the card retention mechanism in the tabs and pivot downward to snap it into place.

80

Removing and Installing Parts

Page 79 Page 81
Image 80
Page 79 Page 81
Contents Microphone connector Diagnostic lights Hard-drive activity lightUSB 2.0 connectors W . d e l l . c o m s u p p o r t . d e l l . c o mAbbreviations and Acronyms Contents Microsoft Windows operating system Using Microsoft Windows XP System Restore Resolving Software and Hardware IncompatibilitiesAddressing Memory With 4-GB Configurations Connecting and Disconnecting Drive CablesRecommended Drive Cable Connections 100107 111112 116Contents What Are You Looking For? Find it Here Warranty information Finding InformationEnter your Service Tag or product model Appropriate for your configurationHow to use Windows XP How to work with programs and filesLocation of Service Tag Setting Up and Using Your ComputerFront View of the Computer Cover latch releaseHeadphone connector Diagnostic lightsPower button Power lightVoltage selection switch Power connectorBack panel connectors Back View of the ComputerBack Panel Connectors Setting Up a Printer Connecting a PrinterPrinter Cable Center/subwooferConnecting to the Internet USB connector on computer 2 USB printer cableSetting Up Your Internet Connection Playing CDs and DVDs Adjusting the Volume Adjusting the PictureCopying CDs and DVDs How to Copy a CD or DVDUsing Blank CDs and DVDs Helpful Tips Media Type Read Write RewritableUsing a Media Card Reader Optional XD-Picture CardSmartMedia SMC SecureDigital Card SDFollow the procedures in Before You Begin on Connecting Two MonitorsConnecting Two Monitors With VGA Connectors Connecting a TV VGA blue connectorSetting Up a Home and Office Network Changing the Display SettingsConnecting to a Network Adapter Network cable Setting Up and Using Your ComputerStandby Mode Power ManagementNetwork Setup Wizard Hibernate Mode Power Options PropertiesPlace the power options icon Enabling Cool ’n’ Quiet TechnologyAdvanced Tab Hibernate TabAbout RAID Configurations RAID Level 1 ConfigurationConfiguring Your Hard Drives for RAID Using the Nvidia MediaShield ROM UtilityUsing Nvidia MediaShield Rebuilding a RAID ConfigurationSetting Up and Using Your Computer Solving Problems Troubleshooting TipsBattery Problems Drive Problems CD and DVD drive problemsMail, Modem, and Internet Problems Hard drive problemsProblems writing to a CD/DVD-RW drive From the Power Schemes tab, select Always OnError Messages Keyboard Problems Lockups and Software Problems Computer does not start upComputer stops responding Program stops respondingSolid blue screen appears Other software problemsProgram crashes repeatedly Media Card Reader Problems Memory Problems Mouse ProblemsNetwork Problems Power Problems Printer Problems Scanner Problems Sound and Speaker Problems No sound from speakersIf the screen is blank Video and Monitor ProblemsNo sound from headphones If the screen is difficult to read Troubleshooting Tools Diagnostic LightsLight Pattern Problem Description Suggested Resolution Remove the card, reinstall it see PCI Have identified a faulty module orReinstalled all modules without error If available, install properly workingLight Pattern Problem Description Option Function Dell DiagnosticsDell Diagnostics Main Menu What Is a Driver? DriversIdentifying Drivers Tab FunctionWindows XP Click the Start button and click Control Panel Reinstalling DriversUsing Windows XP Device Driver Rollback Resolving Software and Hardware Incompatibilities Restoring Your Operating SystemUsing Microsoft Windows XP System Restore Using Dell PC Restore Enabling System RestoreEnsure that Turn off System Restore is unchecked Click SystemTroubleshooting Tools Using the Operating System CD Before You BeginTroubleshooting Tools Removing and Installing Parts Before You BeginRecommended Tools Turning Off Your ComputerBefore Working Inside Your Computer Cover latch release Computer cover Bottom hinge tabs Removing and Installing PartsRemoving the Computer Cover System board Hard drive Removing and Installing Parts Inside View of Your ComputerSerial ATA drive connectors Front-panel connectorSystem Board Components PW12VA1Memory Installation Guidelines Battery socket BT1Standby power indicator MemoryDIMM2 white securing clips DIMM4 black securing clips Addressing Memory With 4-GB ConfigurationsChannel a matched pair of memory Installing Memory Memory connector farthest Securing clipsCrossbar Removing and Installing Parts From processor DIMM1Removing Memory Cards PCI CardsRelease tab Bracket caught outside of slot Alignment guide Alignment bar Card retention doorRemoving and Installing Parts Removing and Installing Parts PCI Express Cards PCI Express x16 card Securing tab Bracket caught outside of slot Card retention door Removing and Installing Parts Removing and Installing Parts Drive Panel Removing the Drive PanelSliding plate lever Side hingesDrive-panel insert Removing and Installing Parts Removing the Drive-Panel InsertReplacing the Drive-Panel Insert Drive panel Drive-panel insert tabDrive panel tabs Side hinges Replacing the Drive PanelAlign the drive panel tabs with the side hinges CD/DVD drive FlexBay for optional floppy DrivesRecommended Drive Cable Connections Connecting Drive Cables Drive Interface ConnectorsConnecting and Disconnecting Drive Cables Power Connector Power cableHard Drives Removing a Hard DriveInstalling a Hard Drive TabsDrive Hard-drive bracket Hard driveSerial ATA data cable Adding a Second Hard Drive Release tabs Second hard drive in lower bayFloppy Drive Removing a Floppy DriveDrive latch release Sliding plate Installing a Floppy Drive Power cable Not present on all computers Media Card Reader Media Card ReaderRemoving a Media Card Reader Media Card Reader Installing a Media Card Reader Removing and Installing Parts 100 CD/DVD DriveRemoving a CD/DVD Drive 101 Drive release latch Sliding plateInstalling a CD/DVD Drive CD/DVD drive103 Battery release lever BatteryReplacing the Battery Computer cover Back of computer Replacing the Computer Cover105 106 Specifications 107108 AudioExpansion Bus DrivesControls and Lights Connectors109 Power 110Wattage rating PhysicalSystem Setup Entering System SetupOverview 111System Setup Options 112Regardless of the No Boot setting 113Performance 114Strip or surge protector 115Time Quickboot feature Boot SequenceSetup & Boot Menu Changing Boot Sequence for the Current Boot 117Clearing Forgotten Passwords Clearing Cmos Settings Cleaning Your ComputerComputer, Keyboard, and Monitor 119Dell Technical Support Policy U.S. Only MouseFloppy Drive CDs and DVDsDefinition of Dell-Installed Software and Peripherals FCC Notice U.S. OnlyDefinition of Third-Party Software and Peripherals FCC Class B122 Dell Dimension E521Contacting Dell 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 Malaysia only 139Should be called from within Singapore or 140 141 142 143 144 145 Glossary146 147 148 149 150 NIC See network adapter151 152 153 154 155 Index156 Problems diagnostic lights, 49 drives 157USB 158
Related manuals
Manual 217 pages 3.31 Kb Manual 55 pages 26.66 Kb Manual 72 pages 7.23 Kb
Top Page Image Contents