Dell manual Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide

Page 12

A basic input/output system (BIOS) that resides in flash memory on the EISA bus and can be upgraded by diskette if required.

The system board includes the following built-in features:

Three EISA and three PCI expansion-card connec- tors, located on the system board. A separate expansion-card slot is available for each EISA and PCI expansion-card connector; there are no shared expansion slots.

An integrated video graphics array (VGA)- compatible video subsystem with an ATI mach64 (264VT) PCI video controller connected to the PCI local bus. The standard video subsystem includes

1 MB of video memory. Maximum resolutions (non- interlaced) are 640 x 480 pixels (16.7 million colors) and 800 x 600 pixels (65,536 colors). Maximum res- olution (interlaced) is 1024 x 768 pixels (256 colors).

An integrated National Semiconductor PC87336 super input/output (I/O) controller that controls the bidirectional parallel port, two serial ports, and the diskette drive in the externally accessible front bay. The super I/O controller resides on the EISA bus.

The parallel port can be set to operate in the following modes via the Parallel Mode category in the System Setup program: output-only (AT-compatible), bi- directional (Personal System/2 [PS/2]-compatible), or extended capabilities port (ECP).

An integrated Adaptec AIC-7880 ultra (fast-20) wide, small computer system interface (SCSI) con- troller. The built-in SCSI controller supports up to two externally accessible SCSI devices in the top bays and up to three SCSI hard-disk drives in the internal bays. The SCSI interface connects to sup- ported devices via a 68-conductor cable. The integrated SCSI controller resides on the PCI local bus for optimum performance.

Integrated server management circuitry that monitors operation of the system fan as well as critical system voltages and temperatures. The integrated server man-

agement circuitry works in conjunction with the Intel LANDesk® Server Manager suite. See the Preface earlier in this guide for a list of documents that describe installation and use of the LANDesk Server Manager suite.

Integrated system board support for the Upgrade Server Management Card which provides improved local and remote server management.

A PS/2-style keyboard port and a PS/2-compatible mouse port.

Standard PowerEdge 2100 systems include a diskette drive and a SCSI CD-ROM drive installed in the exter- nally accessible bays and at least one SCSI hard-disk drive installed in the internal bays.

The following software is included with your Dell com- puter system:

Video drivers for displaying many popular applica- tion programs in high-resolution modes. For more information on these drivers, see Chapter 2, “Using the Dell Server Assistant CD.”

SCSI device drivers that allow your operating sys- tem to communicate with devices attached to the built-in SCSI subsystem. For more information on these drivers, see Chapter 3, “Installing and Config- uring SCSI Drivers.”

The System Setup program for quickly viewing and changing the system configuration information for your computer. For more information on this pro- gram, see Chapter 4, “Using the System Setup Program.”

The EISA Configuration Utility, which allows you to configure installed EISA expansion cards through software rather than by hand. (You must also run the EISA Configuration Utility when installing or removing Industry-Standard Architecture [ISA] cards.) For more information, see Chapter 5, “Using the EISA Configuration Utility.”

Enhanced security features available through either the System Setup program or the EISA Configura- tion Utility include a user password and a supervisor password.

Diagnostics for evaluating your computer’s compo- nents and devices. For information on using the diagnostics, see Chapter 2, “Using the Dell Server Assistant CD” or see the chapter titled “Running the Diskette-Based Diagnostics” in your Diagnostics and Troubleshooting Guide.

1-12 Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide

Image 12
Contents USER’S Guide Page Safety Instructions When Using Your Computer SystemErgonomic Computing Habits Page When Working Inside Your Computer Protecting Against Electrostatic DischargePage Preface About This GuideWarranty and Return Policy Information Other Documents You May NeedNotational Conventions Typographical Conventions Example autoexec.bat and c\windowsPage System Features IntroductionDell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Connecting External Devices Front PanelSupported Operating Systems Preventing Unauthorized Access Inside the Computer Getting HelpUsing the Dell Server Assistant CD Booting the CDCD Main Menu Configure the System Choose LanguageRun System Utilities Use Online ManualsCreate Operating System Support Diskettes Create Windows NT Server 3.51 DiskettesCreate NetWare 4.x Diskettes Create NetWare 3.12 DiskettesInstalling Video Drivers for Windows NT Video DriversAsset Tag Utility Restart Windows NTUsing the Asset Tag Utility Asset Tag Command-Line OptionsAssigning and Deleting an Asset Tag Number Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Installing and Configuring Scsi Drivers Scsi Select Default SettingsSCSISelect Utility Basic Host Adapter Settings Boot Device SettingsDefault Scsi Controller Settings Scsi Device Settings Advanced Host Adapter SettingsStarting the SCSISelect Utility Installation for Microsoft Win- dows NT Using SCSISelect MenusUsing the Scsi Disk Utilities Installation OverviewInstalling Windows NT 3.51 and the Driver Performing a Windows NT 3.51 InstallationPerforming a Windows NT 4.0 Installation Using Windows NT to Install or Update the DriverInstalling or Updating the Driver With Win- dows NT When you see the following message, click OK to exit Removing a Host AdapterSwapping a Host Adapter Restart your computerInstallation for Novell NetWare Troubleshooting for Windows NTInstalling EZ-SCSI Calculating the Slot NumberInstalling NetWare and the Driver Performing a NetWare 4.x InstallationPerforming a NetWare 3.12 Installation Load pathname aic7870.dsk options slot=xUsing NetWare to Install or Update the Driver Using the load Command Line OptionsLoad Command Line Options Devenable= Lunenable=Tagdisable IocombineSample load Command Using Scsi DevicesBit Mask Options Load pathname aic7870 options slot=xBooting From a Scsi Device Using Removable MediaFiles Necessary to Set Up Booting From a Scsi Device Formatting MediaUsing NetWare-Tested and -Approved Drives Drive Status ItemsRead After Write Verify Options Using the NetWare Tape Backup Utility Setting Up a CD-ROM Drive With Net- Ware 3.12 orOptimizing Performance Troubleshooting for NetWare Non-Host-Adapter SpecificHost-Adapter Specific OffDell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Using the System Setup Program System Setup ScreensConfiguration Options and System Data Title BoxSystem Setup Keys HelpKey Functions Entering the System Setup Program Main Menu of the System Setup ProgramMain Menu Categories Boot Options Submenu Categories Boot Options SubmenuService Tag Num LockSpeaker MicroprocessorAdvanced Menu of the System Setup Program Advanced Menu CategoriesParallel Mode Serial PortParallel Port Diskette ControllerSecurity Menu of the System Setup Program Security Menu CategoriesSupervisor Password Is User Password IsSet Supervisor Password Set User PasswordExit Menu Categories Virus Check ReminderUsing the Password Features Using Your Supervisor Password to Secure Your System Operating With a Supervisor Password EnabledDeleting or Changing an Existing Super- visor Password Using the User Password FeatureAssigning a User Password Using Your User Password to Secure Your SystemDeleting or Changing an Existing User Password Disabling a Forgotten PasswordPassword Options Password OptionsResponding to Error Messages Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Using the Eisa Configuration Utility Configuring EISA, ISA, and PCI Expansion CardsSystem Board Options How to Run the Eisa Configura- tion Utility When to Run the Eisa Configu- ration UtilityStarting the Eisa Configuration Utility Making Selections in the Eisa Configu- ration UtilityUsing Online Instructions Learn About Configuring Your Computer Configure ComputerImportant Eisa Configuration Information Main MenuAdd or Remove Boards Adding an Expansion CardView or Edit Details Repositioning an Expansion CardDisplay the list of system board options as follows Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Eisa System Board Options Screen Example Maintain System Configuration Diskette Advanced MenuSet Date and Set Time Exit From This UtilitySet Verification Mode Menu Resolving Resource ConflictsView Additional System Information Menu Maintain SCI Files MenuModeling Mode System Board Options ScreenHow Password Security Works Assigning or Changing a Supervisor Password Deleting an Existing Supervisor PasswordSelect the Supervisor Password category Type your new supervisor passwordAssigning or Changing a User Password Deleting an Existing User PasswordSelect the User Password category Type your new user passwordDisabling a Forgotten Password Safety First-For You and Your Computer Working Inside Your ComputerBefore You Begin System Orientation Removing the Computer CoverReplacing the Computer Cover Removing the Front Bezel Replacing the Front BezelUnpacking Your Hardware Option Inside Your ComputerWorking Inside Your Computer Inside the Chassis-Front/Right Side View Inside the Chassis-Back/Left Side View Removing and Replacing the System Board Assembly Removing the System Board AssemblyPartially remove the system board assembly from the chassis Disconnect the following cables from the system boardReplacing the System Board Assembly Install the system board assembly in the chassisReconnect the cables to the system board Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Installing System Board Options System Board FeaturesExpansion Cards Expansion Card ExamplesInstalling an Expansion Card Expansion SlotsInstalling an Expansion Card Removing an Expansion CardAdding Memory DIMMs and Dimm SocketsMemory Upgrade Kits Dimm Installation GuidelinesInstalling System Board Options Performing a Memory Upgrade Sample Dimm ConfigurationsInstalling a Dimm Installing a Microprocessor Upgrade Removing a DimmRemove the heat sink Remove the microprocessor chip from the socketUnpack the new microprocessor Install the microprocessor chip in the socket Fig- ure 10. Pin-1 Identification12. Installing the Heat Sink Replace the microprocessor securing clipReplacing the System Battery Remove the old batteryInstall the new battery with the side labeled + fac- ing up Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Installing Drives in the External Bays Configuring a DriveJumpers External Drive Bay Hardware Removing and Replacing Front- Panel Inserts Removing and Replacing Plastic InsertsRemoving Metal Inserts Connecting the Drive Removing a Metal InsertInstalling Drives in the External Bays DC Power CablesPrepare the drive for installation Diskette Drive Interface CableInstalling Scsi Drives in the External Bays Verify correct operation of your systemConfigure the controller card if necessary 10 -Pin to 50-Pin Adapter11. Connecting an Optional Scsi Controller Card Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Installing Drives in the Internal Bays Scsi Configuration GuidelinesScsi ID Numbers Device Termination Scsi Termination Jumper LocationsConfiguring the Boot Device Scsi CableScsi Cable for a PowerEdge 2100 System Installing Scsi Hard-Disk Drives in the Internal Bays Unpack each Scsi drive, and prepare it for installationInstall the Scsi drives in the hard-disk drive cage Reinstall the hard-disk drive cage in the chassis FigureAttach the Scsi cable to each Scsi drive Test the Scsi drivesTechnical Specifications Table A-1. Technical SpecificationsDrives Power Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Hardware Configuration Features Jumpers-A General ExplanationFigure B-1. System Board Jumpers Cardbios VGA Eisa Table B-1. System Board JumpersConnectors and Sockets Table B-2. Connectors and Sockets on the System BoardPorts and Connectors Serial and Parallel PortsSerial Port Connectors Figure B-3. Pin Numbers for the Serial Port ConnectorsParallel Port Connector Keyboard and Mouse ConnectorsTable B-3. Pin Assignments for the Serial Port Connectors Keyboard Connector Mouse ConnectorRED Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Scheduling Backups Backup DevicesRecovering Data Maintaining the SystemCleaning System Components Recommended Tools and AccessoriesCleaning the Computer, Monitor, and Keyboard Exteriors Cleaning DrivesTemperature Environmental FactorsHumidity AltitudeDust and Particles CorrosionElectromagnetic and Radio Frequency Interference Power Source Interruptions MagnetismShock and Vibration Power Protection Devices Uninterruptible Power SupplySurge Protectors Line ConditionersRegulatory Notices FCC Notices U.S. OnlyClass a Class BIC Notice Canada Only EN 55022 Compliance Czech Republic OnlyCE Notice Vcci Notices Japan Only Class 1 NoticeClass 2 Notice Polish Center for Testing and Certification Notice Korean Regulatory NoticeWymagania Polskiego Centrum Badañ i Certyfikacji Pozosta³e instrukcje bez pieczeñstwaRegulatory Notices D-141 Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Limited Three-Year Warranty U.S. Only Warranties and Return PolicyCoverage During Year One Limited Three-Year Warranty Canada Only Coverage During Years Two and ThreeGeneral Warranties and Return Policy E-145 Total Satisfaction Return Policy U.S. and Canada Only Table F-1. Technical Specifications Drives Technical Specifications F-149 Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Glossary Bios BBSBTU BZTCcft CD-ROMCGA CmosDimm DINDIP DMADTE ECCECP EDOFAT FCCGUI HMAIPX IRQISA ITELUN MBRMDA MGANLM NMINtfs NvramPost PqfpPRN PVCROM RTCScsi SdmsTFT TSRUMB UPSVDS VesaVGA Vlsi VramXMM XMS
Related manuals
Manual 73 pages 16.31 Kb

2100/180, 2100/200 specifications

The Dell 2100/200 and Dell 2100/180 are innovative offerings from Dell that cater to the demands of a variety of users, ranging from small businesses to larger enterprises. Both models are designed to deliver high performance and reliability, making them indispensable tools in the modern computing environment.

The Dell 2100/200 features an impressive Intel processor that ensures fast and efficient performance, making it suitable for multitasking and handling complex applications. Coupled with a generous RAM configuration, this model can easily manage demanding workloads, resulting in smoother performance and faster processing times. In contrast, the Dell 2100/180, while slightly less powerful, still maintains robust performance levels that are well-suited for general productivity tasks and everyday use.

Both models come equipped with ample storage options, featuring hard disk drives that provide significant space for data and application storage. Users can choose between traditional HDDs and solid-state drives (SSDs), allowing them to prioritize speed and performance based on their specific needs. The flexibility in storage options ensures that users can customize their systems according to their requirements, enhancing the overall user experience.

Connectivity is another area where the Dell 2100 series excels. Both models come with a range of ports including USB, HDMI, and Ethernet, allowing for seamless connectivity with various peripherals and networks. This versatility makes the machines ideal for environments where multiple devices need to be connected simultaneously, whether for presentations, data transfer, or internet access.

In terms of energy efficiency, both the Dell 2100/200 and Dell 2100/180 incorporate advanced cooling technologies that minimize energy consumption while maximizing performance. This not only helps reduce operational costs but also contributes to a more sustainable computing environment.

The design of these models is another distinguishing feature. With a compact form factor, they fit easily into office spaces while maintaining a professional appearance. Their durable build quality ensures longevity, making them a worthwhile investment for businesses.

Overall, the Dell 2100/200 and Dell 2100/180 serve as powerful and reliable machines that combine advanced technologies and user-centric designs. Whether for business or personal use, these models provide a solid foundation for effective computing, ensuring that users can achieve their goals efficiently and effectively.