Dell 2100/180, 2100/200 manual Removing an Expansion Card, Installing an Expansion Card

Page 88

mounting screw

expansion card

card-guide slots

card-edge connector(inside front of computer)

Figure 7-4. Installing an Expansion Card

7.When the card is firmly seated in the connector and the card-mounting bracket is flush with the brackets on either side of it, secure the bracket with the screw you removed in step 4.

8.Connect any cables that should be attached to the card.

See the documentation that came with the card for information about its cable connections.

9.Replace the computer cover according to the instructions in “Replacing the Computer Cover” in Chapter 6, reconnect your computer and peripherals to their power sources, and turn them on.

10.If you are installing an EISA expansion card, start the EISA Configuration Utility and add the new card to your configuration.

See Chapter 5, “Using the EISA Configuration Util- ity,” for instructions.

Removing an Expansion Card

Follow this general procedure to remove an expansion card:

1.If you are relocating or permanently removing an ISA expansion card, enter the change into the EISA Configuration Utility.

See Chapter 5, “Using the EISA Configuration Util- ity,” for instructions.

2.Remove the computer cover according to the instructions in “Removing the Computer Cover” in Chapter 6.

CAUTION: See “Protecting Against Electro- static Discharge” in the safety instructions at the front of this guide.

3.With the cover removed, lay the computer (left side up) on a flat work surface so that you have access to the expansion card slots.

4.If necessary, disconnect any cables connected to the expansion card.

5.Unscrew the card-mounting bracket (Figure 7-3).

6.Grasp the expansion card by its outside corners, and ease it out of its connector.

7.If you are removing the expansion card perma- nently, install a metal filler bracket over the empty card-slot opening.

NOTE: Installing filler brackets over empty card- slot openings is necessary to maintain Federal Communications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the computer and aid in proper cooling and air- flow inside the computer.

8.Replace the computer cover according to the instructions in “Replacing the Computer Cover” in Chapter 6, reconnect your computer and peripherals to their power sources, and turn them on.

7-88 Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide

Image 88
Contents USER’S Guide Page When Using Your Computer System Safety InstructionsErgonomic Computing Habits Page When Working Inside Your Computer Protecting Against Electrostatic DischargePage Preface About This GuideOther Documents You May Need Warranty and Return Policy InformationNotational Conventions Typographical Conventions Example autoexec.bat and c\windowsPage System Features IntroductionDell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Front Panel Connecting External DevicesSupported Operating Systems Preventing Unauthorized Access Inside the Computer Getting HelpBooting the CD Using the Dell Server Assistant CDCD Main Menu Configure the System Choose LanguageRun System Utilities Use Online ManualsCreate Operating System Support Diskettes Create Windows NT Server 3.51 DiskettesCreate NetWare 4.x Diskettes Create NetWare 3.12 DiskettesInstalling Video Drivers for Windows NT Video DriversAsset Tag Utility Restart Windows NTAsset Tag Command-Line Options Using the Asset Tag UtilityAssigning and Deleting an Asset Tag Number Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Scsi Select Default Settings Installing and Configuring Scsi DriversSCSISelect Utility Boot Device Settings Basic Host Adapter SettingsDefault Scsi Controller Settings Scsi Device Settings Advanced Host Adapter SettingsStarting the SCSISelect Utility Installation for Microsoft Win- dows NT Using SCSISelect MenusUsing the Scsi Disk Utilities Installation OverviewInstalling Windows NT 3.51 and the Driver Performing a Windows NT 3.51 InstallationPerforming a Windows NT 4.0 Installation Using Windows NT to Install or Update the DriverInstalling or Updating the Driver With Win- dows NT When you see the following message, click OK to exit Removing a Host AdapterSwapping a Host Adapter Restart your computerInstallation for Novell NetWare Troubleshooting for Windows NTInstalling EZ-SCSI Calculating the Slot NumberInstalling NetWare and the Driver Performing a NetWare 4.x InstallationPerforming a NetWare 3.12 Installation Load pathname aic7870.dsk options slot=xUsing the load Command Line Options Using NetWare to Install or Update the DriverLoad Command Line Options Devenable= Lunenable=Tagdisable IocombineSample load Command Using Scsi DevicesBit Mask Options Load pathname aic7870 options slot=xBooting From a Scsi Device Using Removable MediaFiles Necessary to Set Up Booting From a Scsi Device Formatting MediaDrive Status Items Using NetWare-Tested and -Approved DrivesRead After Write Verify Options Setting Up a CD-ROM Drive With Net- Ware 3.12 or Using the NetWare Tape Backup UtilityOptimizing Performance Troubleshooting for NetWare Non-Host-Adapter SpecificHost-Adapter Specific OffDell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Using the System Setup Program System Setup ScreensConfiguration Options and System Data Title BoxHelp System Setup KeysKey Functions Entering the System Setup Program Main Menu of the System Setup ProgramMain Menu Categories Boot Options Submenu Categories Boot Options SubmenuService Tag Num LockSpeaker MicroprocessorAdvanced Menu of the System Setup Program Advanced Menu CategoriesParallel Mode Serial PortParallel Port Diskette ControllerSecurity Menu of the System Setup Program Security Menu CategoriesSupervisor Password Is User Password IsSet Supervisor Password Set User PasswordExit Menu Categories Virus Check ReminderUsing the Password Features Using Your Supervisor Password to Secure Your System Operating With a Supervisor Password EnabledDeleting or Changing an Existing Super- visor Password Using the User Password FeatureAssigning a User Password Using Your User Password to Secure Your SystemDeleting or Changing an Existing User Password Disabling a Forgotten PasswordPassword Options Password OptionsResponding to Error Messages Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Configuring EISA, ISA, and PCI Expansion Cards Using the Eisa Configuration UtilitySystem Board Options How to Run the Eisa Configura- tion Utility When to Run the Eisa Configu- ration UtilityMaking Selections in the Eisa Configu- ration Utility Starting the Eisa Configuration UtilityUsing Online Instructions Learn About Configuring Your Computer Configure ComputerImportant Eisa Configuration Information Main MenuAdd or Remove Boards Adding an Expansion CardView or Edit Details Repositioning an Expansion CardDisplay the list of system board options as follows Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Eisa System Board Options Screen Example Maintain System Configuration Diskette Advanced MenuSet Date and Set Time Exit From This UtilitySet Verification Mode Menu Resolving Resource ConflictsView Additional System Information Menu Maintain SCI Files MenuModeling Mode System Board Options ScreenHow Password Security Works Assigning or Changing a Supervisor Password Deleting an Existing Supervisor PasswordSelect the Supervisor Password category Type your new supervisor passwordAssigning or Changing a User Password Deleting an Existing User PasswordSelect the User Password category Type your new user passwordDisabling a Forgotten Password Working Inside Your Computer Safety First-For You and Your ComputerBefore You Begin Removing the Computer Cover System OrientationReplacing the Computer Cover Removing the Front Bezel Replacing the Front BezelUnpacking Your Hardware Option Inside Your ComputerWorking Inside Your Computer Inside the Chassis-Front/Right Side View Inside the Chassis-Back/Left Side View Removing and Replacing the System Board Assembly Removing the System Board AssemblyPartially remove the system board assembly from the chassis Disconnect the following cables from the system boardInstall the system board assembly in the chassis Replacing the System Board AssemblyReconnect the cables to the system board Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Installing System Board Options System Board FeaturesExpansion Cards Expansion Card ExamplesInstalling an Expansion Card Expansion SlotsInstalling an Expansion Card Removing an Expansion CardAdding Memory DIMMs and Dimm SocketsMemory Upgrade Kits Dimm Installation GuidelinesInstalling System Board Options Performing a Memory Upgrade Sample Dimm ConfigurationsInstalling a Dimm Installing a Microprocessor Upgrade Removing a DimmRemove the microprocessor chip from the socket Remove the heat sinkUnpack the new microprocessor Install the microprocessor chip in the socket Fig- ure 10. Pin-1 Identification12. Installing the Heat Sink Replace the microprocessor securing clipReplacing the System Battery Remove the old batteryInstall the new battery with the side labeled + fac- ing up Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Configuring a Drive Installing Drives in the External BaysJumpers External Drive Bay Hardware Removing and Replacing Plastic Inserts Removing and Replacing Front- Panel InsertsRemoving Metal Inserts Connecting the Drive Removing a Metal InsertInstalling Drives in the External Bays DC Power CablesPrepare the drive for installation Diskette Drive Interface CableInstalling Scsi Drives in the External Bays Verify correct operation of your systemConfigure the controller card if necessary 10 -Pin to 50-Pin Adapter11. Connecting an Optional Scsi Controller Card Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Scsi Configuration Guidelines Installing Drives in the Internal BaysScsi ID Numbers Device Termination Scsi Termination Jumper LocationsConfiguring the Boot Device Scsi CableScsi Cable for a PowerEdge 2100 System Installing Scsi Hard-Disk Drives in the Internal Bays Unpack each Scsi drive, and prepare it for installationInstall the Scsi drives in the hard-disk drive cage Reinstall the hard-disk drive cage in the chassis FigureAttach the Scsi cable to each Scsi drive Test the Scsi drivesTechnical Specifications Table A-1. Technical SpecificationsDrives Power Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Hardware Configuration Features Jumpers-A General ExplanationFigure B-1. System Board Jumpers Cardbios VGA Eisa Table B-1. System Board JumpersConnectors and Sockets Table B-2. Connectors and Sockets on the System BoardPorts and Connectors Serial and Parallel PortsSerial Port Connectors Figure B-3. Pin Numbers for the Serial Port ConnectorsKeyboard and Mouse Connectors Parallel Port ConnectorTable B-3. Pin Assignments for the Serial Port Connectors Keyboard Connector Mouse ConnectorRED Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Scheduling Backups Backup DevicesRecovering Data Maintaining the SystemCleaning System Components Recommended Tools and AccessoriesCleaning the Computer, Monitor, and Keyboard Exteriors Cleaning DrivesTemperature Environmental FactorsHumidity AltitudeCorrosion Dust and ParticlesElectromagnetic and Radio Frequency Interference Magnetism Power Source InterruptionsShock and Vibration Power Protection Devices Uninterruptible Power SupplySurge Protectors Line ConditionersRegulatory Notices FCC Notices U.S. OnlyClass a Class BEN 55022 Compliance Czech Republic Only IC Notice Canada OnlyCE Notice Class 1 Notice Vcci Notices Japan OnlyClass 2 Notice Polish Center for Testing and Certification Notice Korean Regulatory NoticeWymagania Polskiego Centrum Badañ i Certyfikacji Pozosta³e instrukcje bez pieczeñstwaRegulatory Notices D-141 Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Warranties and Return Policy Limited Three-Year Warranty U.S. OnlyCoverage During Year One Coverage During Years Two and Three Limited Three-Year Warranty Canada OnlyGeneral Warranties and Return Policy E-145 Total Satisfaction Return Policy U.S. and Canada Only Table F-1. Technical Specifications Drives Technical Specifications F-149 Dell PowerEdge 2100/180 and 2100/200 Systems User’s Guide Glossary Bios BBSBTU BZTCcft CD-ROMCGA CmosDimm DINDIP DMADTE ECCECP EDOFAT FCCGUI HMAIPX IRQISA ITELUN MBRMDA MGANLM NMINtfs NvramPost PqfpPRN PVCROM RTCScsi SdmsTFT TSRUMB UPSVesa VDSVGA Vlsi VramXMM XMS
Related manuals
Manual 73 pages 16.31 Kb

2100/180, 2100/200 specifications

The Dell 2100/200 and Dell 2100/180 are innovative offerings from Dell that cater to the demands of a variety of users, ranging from small businesses to larger enterprises. Both models are designed to deliver high performance and reliability, making them indispensable tools in the modern computing environment.

The Dell 2100/200 features an impressive Intel processor that ensures fast and efficient performance, making it suitable for multitasking and handling complex applications. Coupled with a generous RAM configuration, this model can easily manage demanding workloads, resulting in smoother performance and faster processing times. In contrast, the Dell 2100/180, while slightly less powerful, still maintains robust performance levels that are well-suited for general productivity tasks and everyday use.

Both models come equipped with ample storage options, featuring hard disk drives that provide significant space for data and application storage. Users can choose between traditional HDDs and solid-state drives (SSDs), allowing them to prioritize speed and performance based on their specific needs. The flexibility in storage options ensures that users can customize their systems according to their requirements, enhancing the overall user experience.

Connectivity is another area where the Dell 2100 series excels. Both models come with a range of ports including USB, HDMI, and Ethernet, allowing for seamless connectivity with various peripherals and networks. This versatility makes the machines ideal for environments where multiple devices need to be connected simultaneously, whether for presentations, data transfer, or internet access.

In terms of energy efficiency, both the Dell 2100/200 and Dell 2100/180 incorporate advanced cooling technologies that minimize energy consumption while maximizing performance. This not only helps reduce operational costs but also contributes to a more sustainable computing environment.

The design of these models is another distinguishing feature. With a compact form factor, they fit easily into office spaces while maintaining a professional appearance. Their durable build quality ensures longevity, making them a worthwhile investment for businesses.

Overall, the Dell 2100/200 and Dell 2100/180 serve as powerful and reliable machines that combine advanced technologies and user-centric designs. Whether for business or personal use, these models provide a solid foundation for effective computing, ensuring that users can achieve their goals efficiently and effectively.