Dell B110, 1100 owner manual Adding a Second CD or DVD Drive, Drive Alignment screws

11Connect your computer and devices to their electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for drive operation.

12Enter system setup (see page 82) and select the appropriate Drive option.

13Verify that your computer works correctly by running Dell Diagnostics (see page 38).

Adding a Second CD or DVD Drive

1Ensure that the jumper setting on the new drive is set for "cable select" (see the documentation that came with the drive for information).

2Remove two extra alignment screws, shown in the illustration on page 75, from the front of the computer and insert them into the drive.

drive

alignment screws (2)

NOTE: Some computers come with only two extra alignment screws; others come with four. You only need two alignment screws for this procedure.

3Gently slide the drive into place in the drive bay.

Removing and Installing Parts

75