Dell XE After Working Inside Your Computer, Click Start→ Turn Off Computer→ Turn Off

Page 39

Click StartTurn Off ComputerTurn Off.

The computer turns off after the operating system shutdown process is complete.

2.Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut down your operating system, press and hold the power button for about 6 seconds to turn them off.

After Working Inside Your Computer

After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before turning on your computer.

1. Replace the computer cover (see Cover).

CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the computer.

2.Connect any telephone or network cables to your computer.

3.Connect your computer and all attached devices to their electrical outlets.

4.Turn on your computer.

5.Verify that the computer works correctly by running the Dell Diagnostics. See Dell Diagnostics.

Back to Contents Page

Image 39
Contents Page System Setup Screen System SetupEntering System Setup System Setup OptionsDisable Disable EnableDisable Enable with PXE Disable No bootPower On is set to disabled Deactivate defaultPower Off default Power OnEnable F12 = Boot menu enabled by default Boot SequenceOption Settings Changing the Boot Sequence for the Current BootPassword Protection Booting to a USB DeviceIf Password Status is set to Locked Assigning a System PasswordDisabling a Forgotten Password and Setting a New Password Administrator PasswordJumper Settings Clearing Forgotten PasswordsJumper Setting Description Clearing Cmos Settings Starting the Dell Diagnostics From Your Hard Drive DiagnosticsDell Diagnostics When to Use the Dell DiagnosticsBeep Codes Power Button Light CodesLight Pattern Problem Description Suggested Resolution Diagnostic LightsBack to Contents Removing and Replacing Parts Video SpecificationsProcessor MemoryCards NetworkSystem Information Expansion BusExternal Connectors System Board ConnectorsControls and Lights Power PhysicalEnvironmental Back to Contents System Board Layout Expansion Card Removing the Expansion CardReplacing the Expansion Card Coin-Cell Battery Removing the Coin-Cell BatteryReplacing the Coin-Cell Battery Cover Removing the CoverReplacing the Cover Fan Removing the FanReplacing the Fan Front Panel Removing the Front PanelReplacing the Front Panel Hard Drive Removing the Hard DriveReplacing the Hard Drive Heat Sink and Processor Removing the Heat Sink and ProcessorReplacing the Heat Sink and Processor Chassis Intrusion Switch Removing the Chassis Intrusion SwitchReplacing the Chassis Intrusion Switch Internal Speaker Removing the Internal SpeakerReplacing the Internal Speaker Panel Removing the I/O PanelReplacing the I/O Panel Memory Removing the MemoryReplacing the Memory Optical Drive Removing the Optical DriveReplacing the Optical Drive Power Supply Removing the Power SupplyReplacing the Power Supply System Board Removing the System BoardReplacing the System Board Removing the Back Thermal Sensor Thermal SensorRemoving the Front Thermal Sensor Replacing the Front Thermal SensorReplacing the Back Thermal Sensor Recommended Tools Working on Your ComputerBefore Working Inside Your Computer Turning Off Your ComputerClick Start→ Turn Off Computer→ Turn Off After Working Inside Your Computer