Dell 660S manual Removing the Mini-Card

Mini-Card

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

CAUTION: When the Mini-Card is not in the computer, store it in protective antistatic packaging. See "Protecting Against Electrostatic Discharge" in the safety instructions that shipped with your computer.

NOTE: Dell does not guarantee compatibility or provide support for Mini-Cards from sources other than Dell.

If you ordered a wireless Mini-Card with your computer, the card is already installed.

Your computer supports one half Mini-Card connector for Wireless Local Area Network (WLAN).

Removing the Mini-Card

Prerequisites

1Remove the computer cover. See "Removing the Computer Cover" on page 17.

2Remove the fan shroud. See "Removing the Fan Shroud" on page 19.

Mini-Card

29