Dell 8300 technical specifications Removing a CD/DVD Drive

Page 19

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in your Owner's Manual.

1.Shut down the computer through the Start menu.

NOTICE: To disconnect a network cable, first unplug the cable from your computer, and then unplug it from the network wall jack.

2.Turn off any attached devices and disconnect them from their electrical outlets.

3.Disconnect any telephone or telecommunication lines from the computer.

4.Disconnect the computer power cable from the wall outlet, and then press the power button to ground the system board.

5.Ground yourself by touching an unpainted metal surface on the chassis, such as the metal around the card-slot openings at the back of the computer, before touching anything inside your computer.

While you work, periodically touch an unpainted metal surface on the computer chassis to dissipate any static electricity that might harm internal components.

NOTICE: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.

6.Open the computer cover.

Removing a CD/DVD Drive

1.Disconnect the power, audio, and CD/DVD drive cables from the back of the drive.

2.Press inward on the two tabs on the sides of the drive, and then slide the drive upward and remove it from the drive bay.

Image 19
Contents Abbreviations and Acronyms Dell Dimension 8300 SeriesDiagnostic Lights Advanced TroubleshootingLight Pattern Problem Description Suggested Resolution System Messages Beep CodesCode Cause Message Possible Cause Corrective Action Correctly in the system setup programReseat the memory modules Close the computer cover BatteryShut down the computer through the Start menu Open the computer coverBack to Contents Shutting Down Your Computer Before You BeginGetting Started Recommended ToolsPCI Cards AGP Cards Installing a PCI CardCards PCI CardsPage Removing a PCI Card AGP CardsRemoving an AGP Card Installing an AGP Card Closing the Computer Cover Opening the Computer Cover Replacing the Hard Drive DrivesRemoving a Hard Drive Installing a Hard Drive Adding a Second Hard Drive Adding or Replacing a Floppy Drive Adding or Replacing a CD/DVD Drive Installing a Floppy DriveRemove the front-panel inserts Removing a CD/DVD Drive Installing a CD/DVD Drive Removing the Front Panel Removing the Front-Panel Insert Front PanelRemoving the Front Panel Removing the Front-Panel InsertBack to Contents Memory Addressing Memory with 4-GB ConfigurationsInstalling Memory DDR Memory Overview Installing MemoryShut down the computer through the Start menu Close the computer cover Microprocessor Removing the Microprocessor Installing the MicroprocessorRemoving the Microprocessor Page Installing the Microprocessor Close the computer cover Removing and Installing Parts Removing the Power Supply Replacing the Power Supply Power SupplyRemoving the Power Supply Replacing the Power SupplyClose the computer cover Technical Specifications Controls and Lights ConnectorsPower DrivesEnvironmental Removing the System Board Replacing the System Board System BoardRemoving the System Board Replacing the System BoardClose the computer cover System Setup Screens System Setup ProgramEntering the System Setup Program Viewing SettingsOption Function Changing Boot Sequence for the Current Boot Boot SequenceShut down the computer Clearing Forgotten PasswordsHyper-Threading Click Hardware and click Device ManagerBack to Contents Looking Inside Your Computer Technical OverviewSystem Board DC Power Connectors Power SupplyPower Supply DC Connector Pin Assignments DC Power Connector P2 DC Power Connector P1Pin Number Signal name 18-AWG Wire DC Power Connector P7 IDE Interface Cable Connections for Dell-Installed DrivesPlacement of Dell-Installed Cards DC Power Connectors P3, P5, P6, P8, and P9Card Connector Card Description Back to Contents Abbreviations and Acronyms Turn off computer window, click Turn off Turning Off Your Computer
Related manuals
Manual 146 pages 54.14 Kb

8300 specifications

The Dell Dimension 8300 was a personal computer designed to cater to both home and office users, particularly popular during its release in the early 2000s. Known for its robust performance and innovative technologies, the 8300 showcased features that appealed to a wide range of computing needs.

At its core, the Dell 8300 was powered by Intel’s 4th generation Pentium 4 processors, allowing users to experience enhanced speed and efficiency for various applications. With clock speeds reaching up to 3.2 GHz, this processor delivered solid performance for multitasking, gaming, and multimedia applications. The system architecture supported Hyper-Threading technology, which enabled the processor to handle multiple tasks more efficiently by allowing each core to run two threads simultaneously.

One of the standout features of the Dell 8300 was its support for DDR SDRAM. This module offered increased memory bandwidth compared to previous generations, ultimately improving the overall performance of the computer when running applications or handling large files. The machine typically accommodated up to 2GB of RAM, which, in the context of its release period, provided ample memory to run multiple programs simultaneously without significant slowdowns.

In terms of storage, the Dell 8300 was typically equipped with a range of hard drives, often starting from 80GB and going up to 250GB or more. The inclusion of a SATA interface improved data transfer speeds, which was critical for users looking to store and retrieve large files like videos, photos, and software applications efficiently. Furthermore, the system was flexible enough to support additional drives and external storage solutions.

The graphical capabilities of the Dell 8300 included options for integrated graphics as well as dedicated graphics cards such as the NVIDIA GeForce series or ATI Radeon models. This versatility made the system suitable for both casual gaming and more demanding applications, such as graphic design and video editing.

Connectivity options were also a notable feature of the Dell 8300. Equipped with a range of USB ports, FireWire ports, and Ethernet connectivity, users had the freedom to connect multiple peripherals and access high-speed internet with ease. The inclusion of various expansion slots meant that users could upgrade the system over time, adapting to new technologies as they emerged.

Additionally, the Dell Dimension 8300 featured an attractive design with a spacious case that allowed for good airflow and easier upgrades, making it an appealing choice for users looking to enhance their systems. Furthermore, the combination of reliability, performance, and upgrade potential helped solidify the 8300 as a noteworthy contender in the desktop market during its era.