Dell 8300 technical specifications Environmental

Page 35

Environmental

Temperature:

 

 

Operating

10º to 35ºC (50º to 95ºF)

 

 

NOTE: At 35ºC (95ºF), the maximum operating

 

 

altitude is 914 m (3000 ft).

 

 

 

 

Storage

–40º to 65ºC (–40º to 149ºF)

 

 

 

 

Relative humidity

20% to 80% (noncondensing)

 

 

 

 

Maximum vibration:

 

 

 

 

 

Operating

0.25 G at 3 to 200 Hz at 1/2 octave/min

 

 

 

 

Storage

0.5 G at 3 to 200 Hz at 1/2 octave/min

 

 

 

 

Maximum shock:

 

 

Operating

bottom half-sine pulse with a change in velocity of

 

 

50.8 cm/sec (20 inches/sec)

 

 

 

 

Storage

23-G faired-square wave with a velocity change of

 

 

508 cm/sec (200 inches/sec)

 

 

 

 

Altitude:

 

 

Operating

–15.2 to 3048 m (–50 to 10,000 ft)

 

 

NOTE: At 35ºC (95ºF), the maximum operating

 

 

altitude is 914 m (3000 ft).

 

 

 

 

Storage

–15.2 to 10,670 m (–50 to 35,000 ft)

 

 

 

 

 

 

 

Back to Contents Page

Image 35
Contents Abbreviations and Acronyms Dell Dimension 8300 SeriesLight Pattern Problem Description Suggested Resolution Advanced TroubleshootingDiagnostic Lights Code Cause Beep CodesSystem Messages Reseat the memory modules Correctly in the system setup programMessage Possible Cause Corrective Action Close the computer cover BatteryShut down the computer through the Start menu Open the computer coverBack to Contents Shutting Down Your Computer Before You BeginGetting Started Recommended ToolsPCI Cards AGP Cards Installing a PCI CardCards PCI CardsPage Removing an AGP Card AGP CardsRemoving a PCI Card Installing an AGP Card Closing the Computer Cover Opening the Computer Cover Removing a Hard Drive DrivesReplacing the Hard Drive Installing a Hard Drive Adding a Second Hard Drive Adding or Replacing a Floppy Drive Remove the front-panel inserts Installing a Floppy DriveAdding or Replacing a CD/DVD Drive Removing a CD/DVD Drive Installing a CD/DVD Drive Removing the Front Panel Removing the Front-Panel Insert Front PanelRemoving the Front Panel Removing the Front-Panel InsertBack to Contents Memory Addressing Memory with 4-GB ConfigurationsInstalling Memory DDR Memory Overview Installing MemoryShut down the computer through the Start menu Close the computer cover Removing the Microprocessor Removing the Microprocessor Installing the MicroprocessorMicroprocessor Page Installing the Microprocessor Close the computer cover Removing and Installing Parts Removing the Power Supply Replacing the Power Supply Power SupplyRemoving the Power Supply Replacing the Power Supply Close the computer cover Technical Specifications Controls and Lights ConnectorsPower DrivesEnvironmental Removing the System Board Replacing the System Board System BoardRemoving the System Board Replacing the System BoardClose the computer cover System Setup Screens System Setup ProgramEntering the System Setup Program Viewing SettingsOption Function Changing Boot Sequence for the Current Boot Boot SequenceShut down the computer Clearing Forgotten PasswordsHyper-Threading Click Hardware and click Device ManagerBack to Contents System Board Technical OverviewLooking Inside Your Computer Power Supply DC Connector Pin Assignments Power SupplyDC Power Connectors Pin Number Signal name 18-AWG Wire DC Power Connector P1DC Power Connector P2 DC Power Connector P7 IDE Interface Cable Connections for Dell-Installed DrivesPlacement of Dell-Installed Cards DC Power Connectors P3, P5, P6, P8, and P9Card Connector Card Description Back to Contents Abbreviations and Acronyms Turn off computer window, click Turn off Turning Off Your Computer
Related manuals
Manual 146 pages 54.14 Kb