Dell 8300 technical specifications Close the computer cover

Page 29

c.When the heat sink is secured, pivot the retention module clip back until the tab snaps into place to secure the heat sink.

7.Lower the airflow shroud over the heat sink.

8.Reconnect the cooling fan power cable to the FAN2 connector on the system board.

9.Reconnect the power cable to the PWR connector on the system board.

10.Close the computer cover.

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

11.Connect your computer and devices to electrical outlets, and turn them on.

Back to Contents Page

Image 29

Contents Abbreviations and Acronyms Dell Dimension 8300 SeriesLight Pattern Problem Description Suggested Resolution Advanced TroubleshootingDiagnostic Lights Code Cause Beep CodesSystem Messages Reseat the memory modules Correctly in the system setup programMessage Possible Cause Corrective Action Shut down the computer through the Start menu BatteryOpen the computer cover Close the computer coverBack to Contents Getting Started Before You BeginRecommended Tools Shutting Down Your ComputerCards Installing a PCI CardPCI Cards PCI Cards AGP CardsPage Removing an AGP Card AGP CardsRemoving a PCI Card Installing an AGP Card Closing the Computer Cover Opening the Computer Cover Removing a Hard Drive DrivesReplacing the Hard Drive Installing a Hard Drive Adding a Second Hard Drive Adding or Replacing a Floppy Drive Remove the front-panel inserts Installing a Floppy DriveAdding or Replacing a CD/DVD Drive Removing a CD/DVD Drive Installing a CD/DVD Drive Removing the Front Panel Front PanelRemoving the Front-Panel Insert Removing the Front Panel Removing the Front-Panel InsertBack to Contents Installing Memory Addressing Memory with 4-GB ConfigurationsDDR Memory Overview Installing Memory MemoryShut down the computer through the Start menu Close the computer cover Removing the Microprocessor Removing the Microprocessor Installing the Microprocessor Microprocessor Page Installing the Microprocessor Close the computer cover Removing and Installing Parts Removing the Power Supply Power SupplyReplacing the Power Supply Removing the Power Supply Replacing the Power SupplyClose the computer cover Technical Specifications Power ConnectorsDrives Controls and LightsEnvironmental Removing the System Board System BoardReplacing the System Board Removing the System Board Replacing the System BoardClose the computer cover Entering the System Setup Program System Setup ProgramViewing Settings System Setup ScreensOption Function Changing Boot Sequence for the Current Boot Boot SequenceHyper-Threading Clearing Forgotten PasswordsClick Hardware and click Device Manager Shut down the computerBack to Contents System Board Technical OverviewLooking Inside Your Computer Power Supply DC Connector Pin Assignments Power SupplyDC Power Connectors Pin Number Signal name 18-AWG Wire DC Power Connector P1DC Power Connector P2 Placement of Dell-Installed Cards IDE Interface Cable Connections for Dell-Installed DrivesDC Power Connectors P3, P5, P6, P8, and P9 DC Power Connector P7Card Connector Card Description Back to Contents Abbreviations and Acronyms Turn off computer window, click Turn off Turning Off Your Computer

Related manuals

Manual 146 pages 54.14 Kb