Dell 8300 technical specifications Installing the Microprocessor

Page 28

Installing the Microprocessor

NOTICE: Ground yourself by touching an unpainted metal surface on the back of the computer.

NOTICE: Be careful not to bend any of the pins when you unpack the microprocessor. Bending the pins can permanently damage the microprocessor. If any of the pins on the microprocessor appears to be bent, see "Contacting Dell" in the Owner's Manual for instructions on obtaining technical assistance.

1.Unpack the new microprocessor.

NOTICE: You must position the microprocessor correctly in the socket to avoid permanent damage to the microprocessor and the computer when you turn on the computer.

2.If the release lever on the socket is not fully extended, move it to that position.

3.Align the pin-1 corners of the microprocessor and socket.

NOTICE: When you place the microprocessor in the socket, ensure that all of the pins fit into the corresponding holes on the socket.

4.Set the microprocessor lightly in the socket and ensure that all pins are headed into the correct holes. Do not use force, which could bend the pins if the microprocessor is misaligned. When the microprocessor is positioned correctly, press it with minimal pressure to seat it.

5.When the microprocessor is fully seated in the socket, pivot the release lever back toward the socket until it snaps into place to secure the microprocessor.

NOTICE: If you are not installing a microprocessor upgrade kit from Dell, reuse the original heat-sink assembly when you replace the microprocessor.

If you installed a microprocessor replacement kit from Dell, return the original heat-sink assembly and microprocessor to Dell in the same package in which your replacement kit was sent.

6.Install the heat sink:

a.Insert the notched end of the heat sink onto the end of the retention base that is opposite the hinge.

b.Lower the heat sink until it fits securely in the base.

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Dell Dimension 8300 Series Abbreviations and AcronymsDiagnostic Lights Advanced TroubleshootingLight Pattern Problem Description Suggested Resolution System Messages Beep CodesCode Cause Message Possible Cause Corrective Action Correctly in the system setup programReseat the memory modules Battery Shut down the computer through the Start menuOpen the computer cover Close the computer coverBack to Contents Before You Begin Getting StartedRecommended Tools Shutting Down Your ComputerInstalling a PCI Card CardsPCI Cards PCI Cards AGP CardsPage Removing a PCI Card AGP CardsRemoving an AGP Card Installing an AGP Card Closing the Computer Cover Opening the Computer Cover Replacing the Hard Drive DrivesRemoving a Hard Drive Installing a Hard Drive Adding a Second Hard Drive Adding or Replacing a Floppy Drive Adding or Replacing a CD/DVD Drive Installing a Floppy DriveRemove the front-panel inserts Removing a CD/DVD Drive Installing a CD/DVD Drive Front Panel Removing the Front PanelRemoving the Front-Panel Insert Removing the Front Panel Removing the Front-Panel InsertBack to Contents Addressing Memory with 4-GB Configurations Installing MemoryDDR Memory Overview Installing Memory MemoryShut down the computer through the Start menu Close the computer cover Microprocessor Removing the Microprocessor Installing the MicroprocessorRemoving the Microprocessor Page Installing the Microprocessor Close the computer cover Removing and Installing Parts Power Supply Removing the Power SupplyReplacing the Power Supply Removing the Power Supply Replacing the Power SupplyClose the computer cover Technical Specifications Connectors PowerDrives Controls and LightsEnvironmental System Board Removing the System BoardReplacing the System Board Removing the System Board Replacing the System BoardClose the computer cover System Setup Program Entering the System Setup ProgramViewing Settings System Setup ScreensOption Function Boot Sequence Changing Boot Sequence for the Current BootClearing Forgotten Passwords Hyper-ThreadingClick Hardware and click Device Manager Shut down the computerBack to Contents Looking Inside Your Computer Technical OverviewSystem Board DC Power Connectors Power SupplyPower Supply DC Connector Pin Assignments DC Power Connector P2 DC Power Connector P1Pin Number Signal name 18-AWG Wire IDE Interface Cable Connections for Dell-Installed Drives Placement of Dell-Installed CardsDC Power Connectors P3, P5, P6, P8, and P9 DC Power Connector P7Card Connector Card Description Back to Contents Abbreviations and Acronyms Turning Off Your Computer Turn off computer window, click Turn off
Related manuals
Manual 146 pages 54.14 Kb

8300 specifications

The Dell Dimension 8300 was a personal computer designed to cater to both home and office users, particularly popular during its release in the early 2000s. Known for its robust performance and innovative technologies, the 8300 showcased features that appealed to a wide range of computing needs.

At its core, the Dell 8300 was powered by Intel’s 4th generation Pentium 4 processors, allowing users to experience enhanced speed and efficiency for various applications. With clock speeds reaching up to 3.2 GHz, this processor delivered solid performance for multitasking, gaming, and multimedia applications. The system architecture supported Hyper-Threading technology, which enabled the processor to handle multiple tasks more efficiently by allowing each core to run two threads simultaneously.

One of the standout features of the Dell 8300 was its support for DDR SDRAM. This module offered increased memory bandwidth compared to previous generations, ultimately improving the overall performance of the computer when running applications or handling large files. The machine typically accommodated up to 2GB of RAM, which, in the context of its release period, provided ample memory to run multiple programs simultaneously without significant slowdowns.

In terms of storage, the Dell 8300 was typically equipped with a range of hard drives, often starting from 80GB and going up to 250GB or more. The inclusion of a SATA interface improved data transfer speeds, which was critical for users looking to store and retrieve large files like videos, photos, and software applications efficiently. Furthermore, the system was flexible enough to support additional drives and external storage solutions.

The graphical capabilities of the Dell 8300 included options for integrated graphics as well as dedicated graphics cards such as the NVIDIA GeForce series or ATI Radeon models. This versatility made the system suitable for both casual gaming and more demanding applications, such as graphic design and video editing.

Connectivity options were also a notable feature of the Dell 8300. Equipped with a range of USB ports, FireWire ports, and Ethernet connectivity, users had the freedom to connect multiple peripherals and access high-speed internet with ease. The inclusion of various expansion slots meant that users could upgrade the system over time, adapting to new technologies as they emerged.

Additionally, the Dell Dimension 8300 featured an attractive design with a spacious case that allowed for good airflow and easier upgrades, making it an appealing choice for users looking to enhance their systems. Furthermore, the combination of reliability, performance, and upgrade potential helped solidify the 8300 as a noteworthy contender in the desktop market during its era.
Top Page Image Contents