Dell 8300 Battery, Shut down the computer through the Start menu, Open the computer cover

Page 5

Back to Contents Page

Battery

Dell™ Dimension™ 8300 Series Service Manual

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in your Owner's Manual.

A coin-cell battery maintains computer configuration, date, and time information. The battery can last several years.

If you have to repeatedly reset time and date information after turning on the computer, replace the battery.

CAUTION: A new battery can explode if it is incorrectly installed. Replace the battery only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer's instructions.

To replace the battery:

1.Record all the screens in the system setup program so that you can restore the correct settings in step 12.

2.Shut down the computer through the Start menu.

3.Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut down your computer, turn them off now.

NOTICE: To disconnect a network cable, first unplug the cable from your computer, and then unplug it from the network wall jack.

4.Turn off any attached devices and disconnect them from their electrical outlets.

5.Disconnect the computer power cable from the wall outlet, and then press the power button to ground the system board.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.

6.Open the computer cover.

NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.

7.Locate the battery socket on the system board.

NOTICE: If you pry the battery out of its socket with a blunt object, be careful not to touch the system board with the object. Ensure that the object is inserted between the battery and the socket before you attempt to pry out the battery. Otherwise, you may damage the system board by prying off the socket or by breaking circuit traces on the system board.

8.Remove the battery by carefully prying it out of its socket with your fingers or with a blunt, nonconducting object such as a plastic screwdriver.

9.Insert the new battery into the socket with the side labeled "+" facing up, and snap the battery into place.

10.Close the computer cover.

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

11.Connect your computer and devices to electrical outlets, and turn them on.

12.Enter the system setup program and restore the settings you recorded in step 1.

13.Properly dispose of the old battery. See the safety instructions in your Owner's Manual.

Image 5
Contents Abbreviations and Acronyms Dell Dimension 8300 SeriesLight Pattern Problem Description Suggested Resolution Advanced TroubleshootingDiagnostic Lights Code Cause Beep CodesSystem Messages Reseat the memory modules Correctly in the system setup programMessage Possible Cause Corrective Action Shut down the computer through the Start menu BatteryOpen the computer cover Close the computer coverBack to Contents Getting Started Before You BeginRecommended Tools Shutting Down Your ComputerCards Installing a PCI CardPCI Cards PCI Cards AGP CardsPage Removing an AGP Card AGP CardsRemoving a PCI Card Installing an AGP Card Closing the Computer Cover Opening the Computer Cover Removing a Hard Drive DrivesReplacing the Hard Drive Installing a Hard Drive Adding a Second Hard Drive Adding or Replacing a Floppy Drive Remove the front-panel inserts Installing a Floppy DriveAdding or Replacing a CD/DVD Drive Removing a CD/DVD Drive Installing a CD/DVD Drive Removing the Front Panel Front PanelRemoving the Front-Panel Insert Removing the Front Panel Removing the Front-Panel InsertBack to Contents Installing Memory Addressing Memory with 4-GB ConfigurationsDDR Memory Overview Installing Memory MemoryShut down the computer through the Start menu Close the computer cover Removing the Microprocessor Removing the Microprocessor Installing the MicroprocessorMicroprocessor Page Installing the Microprocessor Close the computer cover Removing and Installing Parts Removing the Power Supply Power SupplyReplacing the Power Supply Removing the Power Supply Replacing the Power SupplyClose the computer cover Technical Specifications Power ConnectorsDrives Controls and LightsEnvironmental Removing the System Board System BoardReplacing the System Board Removing the System Board Replacing the System BoardClose the computer cover Entering the System Setup Program System Setup ProgramViewing Settings System Setup ScreensOption Function Changing Boot Sequence for the Current Boot Boot SequenceHyper-Threading Clearing Forgotten PasswordsClick Hardware and click Device Manager Shut down the computerBack to Contents System Board Technical OverviewLooking Inside Your Computer Power Supply DC Connector Pin Assignments Power SupplyDC Power Connectors Pin Number Signal name 18-AWG Wire DC Power Connector P1DC Power Connector P2 Placement of Dell-Installed Cards IDE Interface Cable Connections for Dell-Installed DrivesDC Power Connectors P3, P5, P6, P8, and P9 DC Power Connector P7Card Connector Card Description Back to Contents Abbreviations and Acronyms Turn off computer window, click Turn off Turning Off Your Computer
Related manuals
Manual 146 pages 54.14 Kb

8300 specifications

The Dell Dimension 8300 was a personal computer designed to cater to both home and office users, particularly popular during its release in the early 2000s. Known for its robust performance and innovative technologies, the 8300 showcased features that appealed to a wide range of computing needs.

At its core, the Dell 8300 was powered by Intel’s 4th generation Pentium 4 processors, allowing users to experience enhanced speed and efficiency for various applications. With clock speeds reaching up to 3.2 GHz, this processor delivered solid performance for multitasking, gaming, and multimedia applications. The system architecture supported Hyper-Threading technology, which enabled the processor to handle multiple tasks more efficiently by allowing each core to run two threads simultaneously.

One of the standout features of the Dell 8300 was its support for DDR SDRAM. This module offered increased memory bandwidth compared to previous generations, ultimately improving the overall performance of the computer when running applications or handling large files. The machine typically accommodated up to 2GB of RAM, which, in the context of its release period, provided ample memory to run multiple programs simultaneously without significant slowdowns.

In terms of storage, the Dell 8300 was typically equipped with a range of hard drives, often starting from 80GB and going up to 250GB or more. The inclusion of a SATA interface improved data transfer speeds, which was critical for users looking to store and retrieve large files like videos, photos, and software applications efficiently. Furthermore, the system was flexible enough to support additional drives and external storage solutions.

The graphical capabilities of the Dell 8300 included options for integrated graphics as well as dedicated graphics cards such as the NVIDIA GeForce series or ATI Radeon models. This versatility made the system suitable for both casual gaming and more demanding applications, such as graphic design and video editing.

Connectivity options were also a notable feature of the Dell 8300. Equipped with a range of USB ports, FireWire ports, and Ethernet connectivity, users had the freedom to connect multiple peripherals and access high-speed internet with ease. The inclusion of various expansion slots meant that users could upgrade the system over time, adapting to new technologies as they emerged.

Additionally, the Dell Dimension 8300 featured an attractive design with a spacious case that allowed for good airflow and easier upgrades, making it an appealing choice for users looking to enhance their systems. Furthermore, the combination of reliability, performance, and upgrade potential helped solidify the 8300 as a noteworthy contender in the desktop market during its era.