Dell D03M setup guide Dell DataSafe Local Backup Basic

Restoring Your Operating System

NOTE: If Dell DataSafe Local Backup is not available on your computer, use Dell Factory Image Restore (see “Dell Factory Image Restore” on page 51) to restore your operating system.

You can use Dell DataSafe Local Backup to restore your hard drive to the operating state it was in when you purchased your computer, while preserving the data files.

Dell DataSafe Local Backup allows you to:

•Backup and restore your computer to an earlier operating state

•Create system recovery media (see “Create System Recovery Media (Recommended)” on page 14)

Dell DataSafe Local Backup Basic

To restore your operating system and Dell factory-installed software while preserving the data files:

1.Turn off your computer.

2.Disconnect all the devices (USB drive, printer, and so on) connected to the computer and remove any newly added internal hardware.

3.Turn on your computer.

4.When the DELL logo appears, press <F8> several times to access the Advanced Boot Options window.

NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop; then, shut down your computer and try again.

5. Select Repair Your Computer.

48