Advance DRAM Configuration Submenu
CHAPTER 4: USING YOUR DESKTOP
Advance DRAM Configuration Submenu
Memory-Z
Advanced Memory Settings
tCL
Opens submenu to display the SPD configuration for each memory module.
Allows you to toggle to Manual mode and set all of the timing parameters.
Displays the Column Address Strobe Latency (editable in Manual Mode).
tRTP
1T/2T Timing
Overclock Configuration Submenu
Displays Read to Precharge Command Delay (editable in Manual Mode).
Displays the Command Rate (editable in Manual Mode).
tRCD
tRP
Displays timing of RAS to CAS delay (editable in Manual Mode).
Displays timing of RAS Precharge
Adjust | CPU BClk | (MHz) | Allows you to adjust BClk of processor. |
Spread | Spectrum |
| Enable/Disable Spread Spectrum |
|
|
| Modulation. |
tRAS
tRFC
(editable in Manual Mode).
Displays timing of Row Address Strobe (editable in Manual Mode).
Displays timing of Refresh to Archive/
Adjust PCI Frequency (MHz) Adjust
Allows you to adjust PCI Frequency. Allows you to adjust
If enabled, allows processor to run at faster frequencies than marked.
tWR
Refresh cycle time (editable in Manual Mode).
Displays timing of Write Recover (editable in Manual Mode).
[1-4] Core CPU Turbo Ratio
Limit
Turbo Mode TDC Limit
Override
Limit ratio for cores
Allows you to program the current thresholds for the processor while in
tWTR | Displays Write to Read Delay (editable |
| in Manual Mode). |
tRRD | Displays RAS to RAS delay (editable in |
| Manual Mode). |
Turbo Mode TDP Limit Override
turbo mode.
Allows you to program the power thresholds for the processor while in turbo mode.