2.Click Properties to set the TCP/IP protocol.
3.In the IP Address tab, select Obtain an IP address automatically in the IP Address tab.
4.Leave the Gateway tab blank.
5.In the DNS Configuration tab, choose Dis- able DNS.
4.3 Manually Setting IP Addresses
Although DHCP is the recommended method for setting IP addresses, you may need to manually set addresses. To do so, follow these guidelines:
1.Select Specify an IP address in the IP Address tab. The default IP address of the router is 192.168.123.254. Use 192.168.123.xxx (where xxx is the node number between 1 and 253) for IP Address field and 255.255.255.0 for Subnet Mask field. Make sure each client configured in this fashion has a unique node number.
2.In the Gateway tab, add the IP address of the router (default IP is 192.168.123.254) in the New gateway field and click the Add button.
3.In the DNS Configuration tab, add the addresses (provided by your ISP) into the DNS Server Search Order field and click Add.
Note: Keep your Windows CD handy; you may be asked for it at the end of the installation. Remember to restart your computers after configuring TCP/IP set- tings.
The configuration of TCP/IP for Windows is now complete.
20 | Asanté FriendlyNET Cable/DSL Router |