7.5 Hardware (MAC) Address Control
*This feature should only be used by users with an extensive knowledge of TCP/IP.
By default, all users on the router have full access to local and wide area net- works. If necessary, network managers can control LAN and WAN access by entering the MAC addresses of clients into a table.
Click on the Security button at the top of the Main menu. Under Hardware (MAC) Address Control, click the Configure button.
Check the box to enable address control, and enter the addresses of each client and choose the type of access (LAN only or LAN and WAN).
Note: At least one client must have full access in order to perform administrative tasks.
38 | Asanté FriendlyNET Cable/DSL Router |