Appendix A. Renewing Client IP Addresses
Perform the following to renew the IP addresses of client computers after config- uring your FR3000 Series Router:
A.1 Windows 95/98/Me
Perform the following steps to Release and Renew the IP Address on each client attached to the Router:
1.Go to the Start Button on the lower menu bar.
2.Select Programs/DOS Prompt from the menu.
3.At the DOS Prompt, type winipcfg and hit the Enter key.
4.Select your adapter card from the list shown.
5.Click the Release All button.
6.Click the Renew All button.
7.Click OK.
A.2 Windows NT/2000
Perform the following steps to reset the IP address of any Windows NT or 2000 computers:
1.Go to the Start button on the lower menu bar. From the Start button, choose Run.
2.Type Command and press Enter.
3.At the command line, type ipconfig /release_all and press Enter.
User’s Manual | 57 |