Asante Technologies FR3000 Series user manual Status Screen, Router Status

Chapter 6. Status Screen

To view a synopsis of the router’s sys- tem status, log in to the router. The screen will show the status of the both WAN connection and all attached pe- ripherals (if applicable).

From the Status screen, you can see and do the following:

•View the status of the router

•Renew/release IP settings

6.1 Router Status

The following information can be found on the Status screen:

•IP Address: Refers to the router’s WAN IP address. This address should not be confused with the router’s LAN address (factory de- fault 192.168.123.254)

•Subnet Mask: Refers to the router’s WAN subnet mask (assigned by your ISP)

•Gateway: Refers to the router’s WAN gateway IP address (assigned by your ISP)

•Domain Name Server: Refers to the router’s primary and secondary WAN DNS servers

•Router MAC Address: Refers to the Ethernet address currently in use by the router

•Firmware Version: Refers to the current firmware

The status of the routers’ additional peripheral ports will also appear on the screen, where applicable:

•Printer (FR3004LC and FR3002AL models): Information on your printer connection. Typi- cal messages may be Ready, Not ready (printer is off-line),Printing,

or Device error (printer is out of ink or paper). During a print job, you may click on the Cancel button to manually stop the current print job

User’s Manual 31