| ADVANCED |
3-2-1-7 DTMF & PULSE
ADVANCED → VoIP → DTMF & PULSE
Dial Wait Timeout: Enter the timeout duration after the user picks up the phone set.
Inter Digits Timeout: Enter the timeout duration between the intervals of each key pressed. When exceeding the set timeout duration without entering further digits, the numbers entered will be dialed out.
Minimum DTMF ON Length (Dial on)/ Minimum DTMF OFF Length (Dial off - between tones): This variable is to set the length of DTMF playback.
DTMF Detection Sensitivity: This variable is to set the sensitivity of the telephone keys for the VoIP Router to detect the DTMF.
Enable
Note:
Enable Hook Flash Event: Select Auto, RFC2833, or SIP info for the signaling method of Hook Flash Event.
Payload Type: payload type of RFC2833.
Volume: Select the volume of RFC 2833 from the