D-Link DVG-G5402SP user manual Line

Page 47

DVG-G5402SP User’s Manual

ADVANCED

3-2-1-10 Line

ADVANCED → VoIP → Line

Enable: Tick the check box to enable a line. If some lines are not used, disable them (Pause Function) to avoid unnecessary waiting when an incoming call is diverting to the line.

Listening Volume: Use the drop-down menu to adjust the hearing (listening) volume.

Speaking Volume: Use the drop-down menu to adjust the speaking volume.

Tone Volume: Use the drop-down menu to adjust the tone volume. It will apply to all tones generated by the VoIP Router including Dial Tone, Ring Back Tone and Busy Tone.

Min. FXS Hook Flash Time: Enter the minimum flash time for FXS detecting. When the flash signal generated by the phone set is shorter than Min. FXS Hook Flash Time, FXS port will be on-hook.

Flash Time: Enter the maximum flash time for FXS detecting. When the flash signal generated by the phone set is longer than the Flash Time, FXS port will be on-hook.

Enable Polarity Reversal: Check the box to activate the generation of polarity reversal from FXS.

FXS Chip Option 1: Check the box to avoid mis-detecting the loop state of a subscriber line or PBX user loop from FXS interface. In some cases, the off-hook voltage might cause the FXS interface mis-detect the idle and the active state, in order to avoid this situation, un-check this feature.

D-Link Systems, Inc. 47

Image 47

Contents LinkDVG-G5402SP CE Mark Warning FCC WarningContents Link Systems, Inc DVG-G5402SP User’s Manual Product OverviewDVG-G5402SP User’s Manual Telephone Interface Description Front PanelRear Panel DVG-G5402SP User’s Manual Click Setup Wizard Link Systems, IncSetup Setup Click Restart Link Systems, Inc VoIP Router Web Configuration Setup Setup IP Configuration Setting WAN Port Internet SetupSetup Setup Setup VoIP Setup FXS Representative Number registers to Proxy Each line registers to Proxy independently Setup Setup Setup Setup Wireless Basic Wireless SetupWireless Security Setup WPA Authentication Mode Select Personal Pre-Shared Key WPA Authentication ModeRadius Server LAN SetupWPA Authentication Mode Select Enterprise Radius Setup Setup Time and Date Caller Filter VoIPCaller ID Calling Features Examples of establishing a Three-Way call Calling Feature Instructions1-5 CPT/Cadence CodecAdvanced Digit Map For example, Assume For example Methods of Digit MapAdvanced Dtmf & Pulse 1-8 Fax Advanced Hot Line Line Advanced Advanced Advanced Phone Book SIP Advanced Advanced Advanced Advanced MAC Filtering Access Control3-1 DMZ Firewall and DMZDoS Prevention Advanced IP Filtering Port Filtering Server Port Range Enter comments Advanced WirelessVirtual Server AdvancedAdvanced Advanced Access Control Mode Access ControlQOS WAN QoS Advanced NetworkLAN QoS NAT Traversal Stun Inquiry UPnP Static RouteDevice Management MaintenanceBackup Configurations Template File Backup and RestoreSave and Reboot Backup Configurations FileRestore Default Settings Firmware Update Dynamic DNS Log Settings Diagnostics Provision Maintenance 8 CDR Maintenance → CDRDevice Info StatusVoIP Status LAN Client Logout StatisticsInstructions DVG-G5402SP User’s Manual VoIP Router Configuration-IVRBasic Setup PreparationSave Settings IVR Functions Table DVG-G5402SP User’s ManualVoIP Router Configuration-IVRAdsl PPPoE Settings Dynamic IP Dhcp SettingsPPPoE Password Setting PPPoE Account SettingsPPPoE Character Conversion Table DVG-G5402SP User’s Manual Dialing Principles Dialing PrinciplesStart DVG-G5402SP User’s Manual Appendix Product FeaturesDVG-G5402SP User’s Manual Appendix