D-Link DSL-2540B manual Installing the Router, Connect the Adsl and Telephone Lines

Section 2 - Installing The Router

Installing the Router

Connect the ADSL and Telephone Lines

•Connect an RJ-11 cable between the wall phone jack and the line-end of the splitter (see diagram below).

•Attach another RJ-11 phone cable to the router-end of the splitter and the ADSL port on the rear panel of the router.

•The phone-end of the splitter will be connected to the telephone using a third RJ-11 phone cable.

NOTE: See connections on the installation diagram.

Connect the PC to the Router

•To use the Ethernet connection, connect the Ethernet cable from the computer directly to the router. Connect one end of the Ethernet cable to the port labeled LAN on the back of the router and attach the other end to the Ethernet port of your computer.

•If your LAN has more than one computer, you can attach one end of an Ethernet cable to a hub or a switch and the other to the Ethernet port (labeled LAN) on the router. Note that either a crossover or straight-through Ethernet cable can be used. The router automatically recognizes the type of connection that is required.

D-Link DSL-2540B ADSL2+ 4-Port Router User Manual