Section 7 - Advanced Setup
DMZ
You can define the IP address of the DMZ Host on this screen. The DMZ is used to forward all IP packets coming into the router to a specified IP address. Enter the IP address and click Apply.
SNMP
SNMP (Simple Network Management Protocol) is a network protocol that provides a means to monitor the status and performance of the router, as well as make configuration changes. It enables a management station to configure, monitor and receive trap messages from network devices that are configured for SNMP.
To configure the SNMP agent select Enable, Enter a Read Community, Set Community, System Name, Location, Contact, and the IP address of the Trap Manager. To save the configuration click Apply.
36 |