Connections
Ethernet Port – an RJ-45 jack provides connection to a network device using a Cat 5 Ethernet cable. (Use the included Cross-Over CAT5 cable when connecting to another Ethernet adapter, like the port in a gaming console; use a Straight-Through CAT5 cable when connecting to a switch.)
Reset Button
Power Receptor
Ethernet Port ![](/images/new-backgrounds/1149837/14983711xi2.webp)
Reset Button – press this button to revert to the factory default settings of the DWL-810
Power Receptor – connect one end of the included 5V DC Power Adapter into the power receptor on the DWL-810 and connect the other end of the Power Adapter to a power outlet.
Category 5 is the most reliable grade of twisted-pair cable. It is either Straight- Through cable or Cross-Overcable. Always check your installation instructions to make sure that you have selected the correct type of Category 5 cable.
For the DWL-810, you will use Cross-Overcable to connect to a computer for configuration and to connect to any device with an Ethernet adapter. Use a Straight-Throughcable to connect the DWL-810 directly to a switch.
Default Settings
Operating Mode | Ad-Hoc |
SSID | default |
Channel | 6 |
Transmission rates | Auto |
Encryption | Disabled |
IP Address | 192.168.0.30 |
IP Subnet | 255.255.255.0 |
User Name | Admin (all lower case) |
Password | None (leave field blank) |
| |