D-Link DWL-810 manual Information, Web Configuration

Page 13

Web Configuration

Access the Web Configuration by opening the web-browser and typing in the IP Address of the DWL-810. The DWL-810 default IP Address is http://192.168.0.30, as shown below:

Open the web browser

Type in the IP Address of the DWL-810

http://192.168.0.30

Fig. 5.1

(The IP Address shown in the example above is the default setting. Use this IP address when connecting to a network consisting of other D-Link devices set to their default settings. If you have changed the IP Address of the DWL-810 to conform to a network other than one with D- Link devices, at their default setting, then input that IP Address in the web browser, instead of the default IP Address shown.)

Type admin (lower case) in the User Name field

Leave the Password field blank

Click OK

admin

Fig. 5.2

Information

The Configuration window will appear. Select Information in the menu, as shown. The Information window displays the current setup status of the DWL-810.

Fig. 5.3

13

Image 13
Contents Air DWL-810 Contents Package Contents Introduction LEDs Features and BenefitsConnections Default SettingsWireless Basics Link Air Wireless Family of LAN products include Wireless BasicsStandards Based Technology Installation ConsiderationsGetting Started Setup #1Getting Started Factory Default Settings for the DWL-810 Web ConfigurationInformation Web ConfigurationWireless Web Configuration Static Select Fig IP AddressStatic IP Address StationsAdmin Help InstallationAbout DWL-810 Ethernet-to-Wireless Bridge Power light is not on TroubleshootingDWL-810 Ethernet-to-Wireless Bridge Link light is not on Advanced Setup optionalTechnical Specifications Temperature Physical DimensionsDiagnostic LED Power SpecificationsContacting Technical Support SafetyOperating Channels Link Technical Support over the InternetWhat You Must Do For Warranty Service Warranty and RegistrationWhat Is Not Covered