NETGEAR WN604 user manual Log In to the Access Point,  To log in to the access point

Page 12

Wireless N150 Access Point WN604

Log In to the Access Point

The access point is set, by default, with the IP address of 192.168.0.100 with DHCP disabled.

To log in to the access point:

1.Prepare a computer with an Ethernet adapter.

a.If this computer is part of your network, record its TCP/IP configuration settings.

b.Configure the computer with a static IP address of 192.168.0.210 and 255.255.255.0 for the subnet mask.

2.Connect an Ethernet cable from the access point to the computer.

3.Power up the access point.

a.Connect the power adapter and plug it into an electrical outlet.

b.Make sure that the Power On/Off button on the rear panel is in the On position (pressed in).

4.Verify the following:

• The Power LED is on.

• The LAN LED is on for the LAN port that is connected to your powered-on computer.

• The WiFi LED is blinking.

5.Launch a web browser and enter http://192.168.0.100 in the address field. You are prompted to log in:

6.Type admin in the User name field and password in the Password field, both in lower-case letters, and click Login.

Installation and Basic Configuration

12

Image 12

Contents Wireless N150 Access Point WN604 Technical Support Contents Appendix a Supplemental Information Getting Started About the Access Point Compatible Netgear SwitchesSystem Requirements What’s In the BoxHardware Description Front Panel Front panel LEDsRear Panel WN604 rear panelSide Panel Product LabelInstallation and Basic Configuration Log In to the Access Point  To log in to the access pointInstall the Access Point Configure the System Settings for Your Location To set up the access point for your location Set the Time Set Basic IP Options To configure the basic IP settings of your access point Configure Wireless Access Deploy the Access Point To configure your wireless settings for 11b/bg/ng  To deploy the access pointVerify Wireless Connectivity Wireless Equipment Placement and Range GuidelinesWireless Settings Wireless Settings Screen Fields To configure the wireless settings Wireless N150 Access Point WN604 Configure Basic QoS Settings Set Up and Test Basic Wireless Connectivity  To set up and test wireless connectivitySelect Configuration Wireless Wireless N150 Access Point WN604 Configure Security  To configure a security profile Security ProfilesEdit Security Profile Screen Fields Authentication Settings Wireless Security Options Manually Configure Security Configure WPA2, or WPA2 + WPA, or WPAConfigure WEP  To configure WEP data encryptionWi-Fi Protected Setup WPS  To configure WPSUse WPS to Add a Client to the Wireless Network  To add a client using the WPS button To add a client when logged in to the access point Restrict Wireless Access by MAC Address  To restrict access based on MAC addresses Management Upgrade the Wireless Access Point Firmware Configuration File Management  To back up your current settings To restore the factory settings Change the Administrator Password  To change the administrator passwordEnable the SysLog Server Activity Log View Summary Information System Screen Fields To access Statistics information Network Traffic StatisticsAvailable Wireless Station Statistics Statistic Screen Fields To view the available wireless stations Advanced Configuration Schedule the Wireless Radio Advanced Wireless Settings To schedule the wireless radio Advanced Wireless Settings Screen Fields Advanced QoS Settings  To configure advanced QoS settingsEnable Wireless Bridging QoS queues and parameters To configure bridging on your access point Select the Enable Wireless Bridging check boxWireless N150 Access Point WN604 Configure a Point-to-Point Bridge Wireless point-to-point bridge setupConfigure a Point-to-Multi-Point Wireless Bridge Wireless point-to-multipoint bridge setupWireless N150 Access Point WN604 Troubleshooting Troubleshooting with the LEDs WiFi LED Is OffAll LEDs Are Off Cannot Access the Internet or the LAN Wirelessly Cannot Connect to the Access Point to Configure ItLAN LED Is Off Time-Out Error Supplemental Information Factory Default Settings  To clear all data and restore the factory default valuesAuto Technical Specifications WN604 Technical SpecificationsNetgear Wireless Routers, Gateways, APs Notification of ComplianceNotification of Compliance FCC Requirements for Operation in the United States Industry Canada Interference Reduction Table Wireless N150 Access Point WN604 Notification of Compliance