NETGEAR WN604 user manual Factory Default Settings

Page 60

Wireless N150 Access Point WN604

Factory Default Settings

The Reset button has two functions:

•Reboot. When pressed and released quickly, the access point restarts.

•Reset to Factory Defaults. This button can also be used to clear all data and restore all settings to the factory default values.

To clear all data and restore the factory default values:

1.Power off the access point and power it back on.

2.Use something with a small point, such as a pen, to press the Reset button in and hold it in for at least 5 seconds until the WiFi LED blinks rapidly.

3.Release the Reset button.

•Your device returns to the factory configuration settings shown in the following table.

Table 4. Access point default onfiguration settings

Feature	Default setting

Login URL	www.routerlogin.net or www.routerlogin.com

User name (case-sensitive) printed on	admin
product label

Password (case-sensitive) printed on	password
product label

Static IP address	192.168.0.100

Ethernet MAC address	See bottom label.

Port speed	10/100

Subnet mask	255.255.255.0

DHCP client	Disabled

Supplemental Information

60

Image 60

Contents Wireless N150 Access Point WN604 Technical Support Contents Appendix a Supplemental Information Getting Started About the Access Point Compatible Netgear SwitchesSystem Requirements What’s In the BoxHardware Description Front Panel Front panel LEDsRear Panel WN604 rear panelSide Panel Product LabelInstallation and Basic Configuration Log In to the Access Point  To log in to the access pointInstall the Access Point Configure the System Settings for Your Location To set up the access point for your location Set the Time Set Basic IP Options To configure the basic IP settings of your access point Configure Wireless Access Deploy the Access Point To configure your wireless settings for 11b/bg/ng  To deploy the access pointVerify Wireless Connectivity Wireless Equipment Placement and Range GuidelinesWireless Settings Wireless Settings Screen Fields To configure the wireless settings Wireless N150 Access Point WN604 Configure Basic QoS Settings Set Up and Test Basic Wireless Connectivity  To set up and test wireless connectivitySelect Configuration Wireless Wireless N150 Access Point WN604 Configure Security  To configure a security profile Security ProfilesEdit Security Profile Screen Fields Authentication Settings Wireless Security Options Manually Configure Security Configure WPA2, or WPA2 + WPA, or WPAConfigure WEP  To configure WEP data encryptionWi-Fi Protected Setup WPS  To configure WPSUse WPS to Add a Client to the Wireless Network  To add a client using the WPS button To add a client when logged in to the access point Restrict Wireless Access by MAC Address  To restrict access based on MAC addresses Management Upgrade the Wireless Access Point Firmware Configuration File Management  To back up your current settings To restore the factory settings Change the Administrator Password  To change the administrator passwordEnable the SysLog Server Activity Log View Summary Information System Screen Fields To access Statistics information Network Traffic StatisticsAvailable Wireless Station Statistics Statistic Screen Fields To view the available wireless stations Advanced Configuration Schedule the Wireless Radio Advanced Wireless Settings To schedule the wireless radio Advanced Wireless Settings Screen Fields Advanced QoS Settings  To configure advanced QoS settingsEnable Wireless Bridging QoS queues and parameters To configure bridging on your access point Select the Enable Wireless Bridging check boxWireless N150 Access Point WN604 Configure a Point-to-Point Bridge Wireless point-to-point bridge setupConfigure a Point-to-Multi-Point Wireless Bridge Wireless point-to-multipoint bridge setupWireless N150 Access Point WN604 Troubleshooting Troubleshooting with the LEDs WiFi LED Is OffAll LEDs Are Off Cannot Access the Internet or the LAN Wirelessly Cannot Connect to the Access Point to Configure ItLAN LED Is Off Time-Out Error Supplemental Information Factory Default Settings  To clear all data and restore the factory default valuesAuto Technical Specifications WN604 Technical SpecificationsNetgear Wireless Routers, Gateways, APs Notification of ComplianceNotification of Compliance FCC Requirements for Operation in the United States Industry Canada Interference Reduction Table Wireless N150 Access Point WN604 Notification of Compliance