NETGEAR WN604 user manual Set the Time, Set Basic IP Options

Page 15

Wireless N150 Access Point WN604

Set the Time

To configure your time settings:

1. Select Configuration > System > Basic > Time. The Time screen displays:

2.Configure the following information:

•Time Zone. From the drop-down list, select the local time zone for your access point from a list of all available time zones. The default is USA-Pacific.

•NTP Client. Enable NTP client to synchronize the time of the access point with an NTP server. The default is Enable.

Note: You need an Internet connection to get the current time.

•Use Custom NTP Server. Select this check box if you have a custom NTP server. By default, this option is disabled.

•Hostname / IP Address. Enter the host name or the IP address of the custom NTP server. The default is time-b.netgear.com.

3.Click Apply.

Set Basic IP Options

The basic IP settings for your access point are entered on this screen. Most of the default settings work in most cases. However, if your access point is part of a more complex LAN network, then modify the settings to meet the requirements of your network based on the explanation of the various fields.

Installation and Basic Configuration

15

Image 15

Contents Wireless N150 Access Point WN604 Technical Support Contents Appendix a Supplemental Information Getting Started Compatible Netgear Switches About the Access PointSystem Requirements What’s In the BoxHardware Description Front panel LEDs Front PanelWN604 rear panel Rear PanelProduct Label Side PanelInstallation and Basic Configuration  To log in to the access point Log In to the Access PointConfigure the System Settings for Your Location Install the Access Point To set up the access point for your location Set Basic IP Options Set the Time To configure the basic IP settings of your access point  To deploy the access point Configure Wireless AccessDeploy the Access Point  To configure your wireless settings for 11b/bg/ngWireless Equipment Placement and Range Guidelines Verify Wireless ConnectivityWireless Settings Wireless Settings Screen Fields To configure the wireless settings Wireless N150 Access Point WN604 Configure Basic QoS Settings Set Up and Test Basic Wireless Connectivity  To set up and test wireless connectivitySelect Configuration Wireless Wireless N150 Access Point WN604 Configure Security  To configure a security profile Security ProfilesEdit Security Profile Screen Fields Authentication Settings Wireless Security Options Configure WPA2, or WPA2 + WPA, or WPA Manually Configure Security To configure WEP data encryption Configure WEP To configure WPS Wi-Fi Protected Setup WPSUse WPS to Add a Client to the Wireless Network  To add a client using the WPS button To add a client when logged in to the access point Restrict Wireless Access by MAC Address  To restrict access based on MAC addresses Management Upgrade the Wireless Access Point Firmware  To back up your current settings Configuration File Management To restore the factory settings  To change the administrator password Change the Administrator PasswordEnable the SysLog Server Activity Log System Screen Fields View Summary InformationNetwork Traffic Statistics  To access Statistics informationStatistic Screen Fields Available Wireless Station Statistics To view the available wireless stations Advanced Configuration Schedule the Wireless Radio Advanced Wireless Settings To schedule the wireless radio Advanced Wireless Settings Screen Fields  To configure advanced QoS settings Advanced QoS SettingsQoS queues and parameters Enable Wireless BridgingSelect the Enable Wireless Bridging check box  To configure bridging on your access pointWireless N150 Access Point WN604 Wireless point-to-point bridge setup Configure a Point-to-Point BridgeWireless point-to-multipoint bridge setup Configure a Point-to-Multi-Point Wireless BridgeWireless N150 Access Point WN604 Troubleshooting Troubleshooting with the LEDs WiFi LED Is OffAll LEDs Are Off Cannot Access the Internet or the LAN Wirelessly Cannot Connect to the Access Point to Configure ItLAN LED Is Off Time-Out Error Supplemental Information  To clear all data and restore the factory default values Factory Default SettingsAuto WN604 Technical Specifications Technical SpecificationsNotification of Compliance Netgear Wireless Routers, Gateways, APsNotification of Compliance FCC Requirements for Operation in the United States Industry Canada Interference Reduction Table Wireless N150 Access Point WN604 Notification of Compliance