NETGEAR WG302 manual Access Point Name NetBIOS

Page 12

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302

Figure 3-7: IP Settings menu

Access Point Name (NetBIOS)

Enter a new name for the wireless access point and click Apply to save your changes.

The IP Address

The wireless access point is shipped preconfigured with its DHCP client disabled and with the following private static IP addresses:

IP Address — 192.168.0.228

IP Subnet Mask — 255.255.255.0

Gateway — 0.0.0.0

Primary and Secondary DNS Servers — 0.0.0.0

If your network has a requirement to use a different IP addressing scheme, you can make those changes in this menu. These settings are only required if the “Use this IP address” radio button is chosen. Remember to click Apply to save your changes.

3-12

Basic Installation and Configuration

July 2005 v3.0

Image 12
Contents Chapter Basic Installation and Configuration Observing Placement and Range GuidelinesCabling Requirements Default Factory Settings Feature Factory Default SettingsUnderstanding WG302 Wireless Security Options LUHOHVVDWD 6HFXULW\2SWLRQVInstalling the WG302 Access Point SET UP the WG302 Access PointLogin window Web browser will then display the WG302 settings Configure the settings appropriate for your network Deploy the WG302 Access Point Verify Wireless Connectivity How to Log In to the WG302 Using Its Default IP Address Using the Basic IP Settings OptionsAccess Point Name NetBIOS Understanding Basic Wireless Settings Spanning Tree ProtocolBasic Installation and Configuration Basic Installation and Configuration Wireless Security Settings Understanding WEP/WPA Security OptionsBasic Installation and Configuration Before You Change the Ssid and WEP Settings WPA Radius SettingsHow to Set Up and Test Basic Wireless Connectivity How to Restrict Wireless Access by MAC Address Select the Turn Access Control On check boxHow to Configure WEP To configure WEP data encryption, follow these stepsHow to Configure WPA with Radius Click Radius Server Settings in the Security menu 13 Wireless Settings menu How to Configure WPA-PSK 14 WEP/WPA Settings menuHow to Configure WPA2 with Radius 15 Radius Server Settings menuEnter the Radius settings How to Configure WPA2-PSK 16 WEP/WPA Settings menuHow to Configure WPA and WPA2 with Radius 17 WEP/WPA Settings menu18 Radius Server Settings menu Enter the Radius settings How to Configure WPA2-PSK and WPA2-PSK 19 WEP/WPA Settings menu20 WEP/WPA Settings menu Basic Installation and Configuration
Related manuals
Manual 108 pages 34.32 Kb