NETGEAR WG302 manual How to Configure WPA2-PSK, 16 WEP/WPA Settings menu

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302

5.Click WEP/WPA Settings in the Security menu.

Figure 3-16: WEP/WPA Settings menu

6.Choose WPA2 with Radius from the list.

7.Click Apply to save your settings.

How to Configure WPA2-PSK

Note: Not all wireless adapters support WPA2. Furthermore, client software is required on the client. Make sure your client card supports WPA2. Consult the product document for your wireless adapter and WPA2 client software for instructions on configuring WPA2 settings.

To configure WPA2-PSK, follow these steps:

1.Log in at the default LAN address of http://192.168.0.229 with the default user name of admin and default password of password, or using whatever LAN address and password you have set up.

3-28 Basic Installation and Configuration

July 2005 v3.0