NETGEAR WG302 manual Understanding WEP/WPA Security Options, Wireless Security Settings

Page 16

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302

Understanding WEP/WPA Security Options

The table below identifies the various WEP/WPA security options. A full explanation of these standards is available in Appendix B, “Wireless Networking Basics”.

Figure 3-9: Wireless Security Settings

The WEP/WPA settings are explained as follows:

Network Authentication: Specifies the Authentication type used. The default is Open System. Select the desired option:

Open System: If selected, you have the option of using WEP encryption, or no encryption.

Shared Key: If selected, you must use WEP; at least one shared key must be entered.

Legacy 802.1x: If selected, you must configure the Radius Server Settings Screen.

WPA-PSK: If selected, you must use TKIP encryption, and enter the WPA passphrase (Network key).

WPA with Radius: If selected, you must configure the Radius Server Settings Screen.

WPA2-PSK: WPA2 is a later version of WPA. Only select this if all clients support WPA2. If selected, you must use AES encryption, and enter the WPA passphrase (Network key).

3-16

Basic Installation and Configuration

July 2005 v3.0

Image 16
Contents Chapter Basic Installation and Configuration Observing Placement and Range GuidelinesCabling Requirements Default Factory Settings Feature Factory Default SettingsUnderstanding WG302 Wireless Security Options LUHOHVVDWD 6HFXULW\2SWLRQVInstalling the WG302 Access Point SET UP the WG302 Access PointLogin window Web browser will then display the WG302 settings Configure the settings appropriate for your network Deploy the WG302 Access Point Verify Wireless Connectivity How to Log In to the WG302 Using Its Default IP Address Using the Basic IP Settings OptionsAccess Point Name NetBIOS Understanding Basic Wireless Settings Spanning Tree ProtocolBasic Installation and Configuration Basic Installation and Configuration Wireless Security Settings Understanding WEP/WPA Security OptionsBasic Installation and Configuration Before You Change the Ssid and WEP Settings WPA Radius SettingsHow to Set Up and Test Basic Wireless Connectivity How to Restrict Wireless Access by MAC Address Select the Turn Access Control On check boxHow to Configure WEP To configure WEP data encryption, follow these stepsHow to Configure WPA with Radius Click Radius Server Settings in the Security menu 13 Wireless Settings menu How to Configure WPA-PSK 14 WEP/WPA Settings menuHow to Configure WPA2 with Radius 15 Radius Server Settings menuEnter the Radius settings How to Configure WPA2-PSK 16 WEP/WPA Settings menuHow to Configure WPA and WPA2 with Radius 17 WEP/WPA Settings menu18 Radius Server Settings menu Enter the Radius settings How to Configure WPA2-PSK and WPA2-PSK 19 WEP/WPA Settings menu20 WEP/WPA Settings menu Basic Installation and Configuration
Related manuals
Manual 108 pages 34.32 Kb