Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
How to Configure WPA2 with Radius
Note: Not all wireless adapters support WPA2. Furthermore, client software is required on the client. Make sure your client card supports WPA2. Consult the product document for your wireless adapter and WPA2 client software for instructions on configuring WPA2 settings.
To configure WPA2, follow these steps:
1.Log in at the default LAN address of http://192.168.0.229 with the default user name of admin and default password of password, or using whatever LAN address and password you have set up.
2.Click Radius Server Settings in the Security menu.
Figure 3-15: Radius Server Settings menu
Basic Installation and Configuration |
July 2005 v3.0