Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
How to Log In to the WG302 Using Its Default IP Address
1.192.168.0.228 is the default IP address of your access point. The WG302 is set by default with the DHCP client disabled.
Note: The computer you are using to connect to the WG302 should be configured with an IP address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0.
2.Open a Web browser such as Internet Explorer or Netscape Navigator.
3.Connect to the WG302 by entering its default address of http://192.168.0.228 into your browser.
4.A login window like the one shown below opens:
Figure 3-6: Login window
Log in use the default user name of admin and default password of password.
Once you have entered your access point name, your Web browser should automatically find the WG302 Access Point and display the home page, as shown in “Login result: WG302 home page” on page
Using the Basic IP Settings Options
The Basic IP Settings menu is under the Basic heading of the main menu. Use this menu to configure DHCP, static IP, and access point access point name settings.
Basic Installation and Configuration |
July 2005 v3.0